武汉招聘

Description:

This product focused position verifies and validates the functionality of Cummins’ products across a wide range of customer requirements, across a variety of applications, in various environments.  This work plans, tracks, and evaluates results from a wide range of analyses and functional tests to assess product risk and performance. These results are expected to drive quality decisions and proactively resolve product issues before the product reaches the customer.
Obtains input and negotiates with Design Verification Plan and Report (DVP&R) stakeholders to define technical requirements and delivers an optimized subsystem-based analytical and experimental verification plan to the program or project team.
Makes decisions in the areas of verification and validation that impact product performance, reliability, and durability.
Investigates and addresses potential system concerns or issues, understands causal mechanisms, recommends appropriate action, owns problem resolution and documents results with guidance from more experienced team members.
Applies and improves processes such as technical requirements, iDFMEA, Engineering Standard Work (ESW), DVP&R optimization, test standards, and problem solving and tools such as Integrity, Microsoft Power BI, and McParts required to support the processes and enable high quality decision making.
Provides independent leadership of smaller business impact projects or ownership of complex components, products, systems or services with greater elements of ambiguity over the senior or lead engineer level and with full accountability to the project team.
Delivers independent execution of established and emerging work processes and systems, while still developing technology or product knowledge.
Leads the development and improvement of work processes and systems across a functional discipline area within a business unit site.
Coordinates and directs work amongst technicians and temporary student employees, assists in the transfer of knowledge to lesser experienced engineers through either indirect (scope of influence) or direct management of a small, local group of engineers.
Provides support and guidance to influence technical direction within a project team and continues to develop proficiency in the competency areas critical to success in the role.
Operates as a recognized specialist in a discipline or product area within the immediate team.


Qualification & Experience:

Skills

Product Verification and Validation Management - Coordinates the development of design verification and system validation plans from a variety of inputs to identify failure modes while managing risk and relative priority; evaluates analytical and experimental test results following engineering principles to verify that products meet internal technical requirements and to validate that design solutions meet customer needs; produces recommendations with technical documentation to support product decisions.

Product Problem Solving - Solves product problems using a process that protects the customer; determines the assignable cause; implements robust, data-based solutions; and identifies the systemic root causes and recommended actions to prevent problem reoccurrence.

Analytical Modeling and Test Integration/Optimization - Develops a physics-based understanding of customer duty cycles using real world collected data representative of the full range of customer usage; compares analytical and experimental results and resolves differences to maintain calibrated analytical models; generates experimental testing plans that deliver optimal analysis and test coverage.

Product Failure Mode Avoidance - Mitigates potential product failure modes, by identifying interfaces, functions, functional requirements, interactions, control factors, noise factors, and prioritized potential failure modes and potential failure causes for the system of interest to effectively and efficiently improve the reliability of Cummins’ products.

System Requirements Engineering  - Uses appropriate methods and tools to translate stakeholder needs into verifiable requirements to which designs are developed; establishes acceptance criteria for the system of interest through analysis, allocation and negotiation; tracks the status of requirements throughout the system lifecycle; assesses the impact of changes to system requirements on project scope, schedule, and resources; creates and maintains information linkages to related artifacts.

Product Interface Management and Integration - Identifies and analyzes the interfaces and interactions across system boundaries by specifying the requirements and limits to ensure that the product meets requirements; controls the interactions across the system element boundaries by making sure that they remain within specified limits; integrates system elements by creating an integration plan, including identification of method and timing for each activity to make it easier to find, isolate, diagnose, and correct.

Decision quality - Making good and timely decisions that keep the organization moving forward.

Drives results - Consistently achieving results, even under tough circumstances.

Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.

Builds networks - Effectively building formal and informal relationship networks inside and outside the organization.

Resourcefulness - Securing and deploying resources effectively and efficiently.

Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.

Education, Licenses, Certifications

College, university, or equivalent Bachelor's degree in Engineering or other relevant technical disciplines is required.
This position may require licensing for compliance with export controls or sanctions regulations.

Experience

Prior Senior or Lead Engineer equivalent work experience in a relevant discipline area is required with a demonstrated track record of technical problem solving and quality decision making. Knowledge of MS Office tools is preferred.

    
康明斯是全球***的独立发动机制造商，产品线包括柴油和代用燃料发动机、发动机关键零部件（燃油系统、控制系统、进气处理、滤清系统和尾气处理系统）以及发电系统。

康明斯公司成立于1919年2月，总部设在美国印第安纳州哥伦布市，公司通过其在全球190多个国家和地区的600多家分销机构和6500多个经销商网点向客户提供服务。康明斯在全球范围内拥有员工54,600多人，2016年实现销售额175亿美元。

康明斯是美国财富五百强企业，并连续九年当选《财富》杂志“全球最受尊敬的企业”。是排行榜上***一家柴油机公司。

自从2006年，凭借其在经济发展、环境保护和社会责任方面的杰出表现，康明斯公司连续入选道·琼斯北美可持续发展指数榜。全球***的2500家企业中，只有在可持续发展关键指标中排名位居前10%的佼佼者方能入选该榜单。

康明斯中国荣获2016前程无忧“典范雇主”及HREC 2016中国员工价值福利大奖。


康明斯公司的使命
驱动世界前行，实现至美生活
秉承“驱动世界前行，实现至美生活”的经营理念，康明斯致力于为包括股东、客户、雇员、社区和环境在内的利益关系人创造价值。

康明斯公司的愿景
创新不竭，成就客户


康明斯公司的核心价值观
● 正直诚信：言出必行，恪守准则
● 多元包容：兼听则明,多元制胜
● 互助关爱：他人福祉,铭记于心
● 团队协作：协作共赢,创造佳绩

    作为康明斯在中国市场的长期战略之一，康明斯东亚研发有限公司是康明斯有限公司和东风康明斯发动机有限公司共同投资组建的合资企业，也是外资柴油机企业在华设立的***家技术研发中心。公司坐落在武汉经济开发区内，主要提供柴油及压缩天然气发动机、发电设备以及过滤/排气元件的研究开发和实验发展（包括为研发活动服务的中间试验），以及工程技术服务和支持（“技术服务”）。　　技术服务包括：适应性开发、产品开发、货源鉴定、供应商开发、排放测试、认证服务、客户应用工程设计以及针对中国市场的***解决方案的开发。康明斯与东风公司合作设立的康明斯东亚研发有限公司的成功奠基标志着中国市场在康明斯全球研发战略地位的重大提升，对中国发动机产业的技术进步和关键研发人才的培养起到推动作用。公司将本着立足中国，面向国际的研发方针，充分利用中国市场的巨大容量，开发不仅能够满足国内市场需求，而且具有一流国际竞争力的新一代发动机平台。
    至2010年12月31日，康明斯东亚研发有限公司建有厂房建筑面积11066平方米，总投资1.76亿人民币，已建成10个包括具有全流排放测试能力的世界先进水平发动机测试台架，以及车辆先导中心、电子控制实验室、应用力学和材料学试验室、滤清实验室在内的大量先进测试和开发平台。
    从2010年12月起，由康明斯投资，康明斯东亚研发有限公司启动了新一轮规模和能力扩建工程。此次投资总额共计3250万美元，将厂房建筑面积扩展为17566平方米，并新增10个世界一流水平的发动机试验台架，其中包括4个混和动力发动机试验台架、冷启动试验室以及噪音振动实验室；拥有170多名研发及专业技术支持人员组成技术团队，与欧美市场同步进行发动机产品和技术的研制开发。本次扩建完成后，东亚研发将成为仅次于美国总部技术中心的康明斯全球第二大研发机构。
    康明斯东亚研发有限公司还将与相关部门通力合作，为排放法规的制定和实施提供技术支持。