R&D Test Engineer 研发与测试工程师
斯凯杰科亚太(天津)机械有限公司
- 公司规模:50-150人
- 公司性质:外资(欧美)
- 公司行业:机械/设备/重工
职位信息
- 发布日期:2022-06-29
- 工作地点:天津-东丽区
- 工作经验:5-7年经验
- 学历要求:本科
- 语言要求:英语熟练
- 职位月薪:1-1.4万
- 职位类别:技术研发工程师
职位描述
Performance Expectations
Evaluate static and dynamic stability of Skyjack equipment through engineering calculations and testing in accordance with applicable Standards.
Develop testing equipment and test plans required for testing and validation
Develop and carry out validation and test procedures on various components and subsystems presently on Skyjack equipment with an emphasis on providing ideas and solutions to improve reliability and performance.
Document testing program findings through writing of comprehensive test reports and present findings to management and/or colleagues as required
Develop technical documentation required for formal certification.
Maintaining and updating test and data acquisition equipment inventory to ensure the most efficient validation procedures are utilized
Investigate equipment failures and difficulties to diagnose faulty operation and make recommendations for improvement.
Apply a wide variety of established or modified engineering methods or techniques with considerable independence of action.
Other duties as assigned
Credentials
Bachelor‘s degree or above
Engineering Degree in Mechanical Engineering or Electrical Engineering and preference will be given to candidates registered as a Professional Engineer in China.
Minimum 3 years of experience as a Test Engineer, Mechanical Engineer or Electrical
Design Engineer in a mobile/heavy equipment (or related) manufacturing environment.
Engineering calculation and testing experience essential
Design experience and 3D modeling experience essential
Strong trouble shooting attributes / skills
Working knowledge of PLC’s or other programmable devises an asset
Experience with data acquisition hardware / software (Labview, Somat) an asset
Experience with engineering software (MathCad, FEA, CFD, Automation Studio, Matlab Simulink) an asset
Troubleshooting of various control circuits, electrical and hydraulic systems an asset
Preference to have hands on experience with electrical, mechanical, hydraulic testing and development of electrical, mechanical, hydraulic test plans
Desired Characteristics
Excellent communication skills with the ability to work well with a cross functional technical team as well as with manufacturing personnel.
Ability to work effectively in groups and individually with minimal supervision
Confident working with instrumentation and measurement tools
Why this is an exciting opportunity
Working for Market professional Original Equipment Manufacturer (OEM).
Skyjack is part of Linamar Group with over 20,000 employees worldwide making your growth opportunity limitless. Robust onboarding program, we will train you.
Participating in the development of brand new products / machines.
Growth in test and validation engineering that provides a wide range of experience dealing with Skyjack's full product line. Our machine weights range from 2,000 lbs to 40,000 lbs (half a car to the size of 10+ cars).
Working towards your Professional Engineer designation reporting to a Professional Engineer and working on Engineering issues
Wide range of experience including dynamic stability, static stability and various performance and automated cycle testing (PLC programing, calculations, hydraulic and electrical design troubleshooting. Developing new design solutions, performing software and controller validation. Tipping Machines to find balancing points and their absolute limits).
Sharing your time between office work and hands on experience makes it very interesting
No repetitive boring work, every day is a new challenge, new product and a new opportunity
Limitless learning opportunities to be part of every design phase, technical challenges and resolutions including but not limited to: battery powered hydraulic drive, battery powered electric AC or DC drive, ICE diesel, dual fuel and hybrid technologies.
Great team environment, learning from each other and working with a technician to provide assistance.
Designing our own testing support equipment in the R&D machining shop including high tech water jet, plasma cutter, mills, lathe, break, welders, saws, sheer, etc.
Why Skyjack:
Community based outreach supporting both local and global initiatives and charities.
Social committees and sports teams.
Discounts for local vendors and events, including auto supplier discounts.
About Skyjack
Skyjack supplies construction rental companies globally with quality engineered, simple, and reliable access and telehandler equipment. Initially started as a scissor lift manufacturer in 1985.
As a dominant player in a consistently evolving industry, Skyjack employees thrive on absorbing new information and have a thirst for continuous improvement in their professional selves. In 2002 Skyjack became a part of the Linamar Corporation and has since been able to leverage strategic partnerships and use the guidance of their parent company to rapidly change the face of the access industry.
Every aspect of the company is deeply rooted in Skyjacks safety initiatives as this can be an extremely challenging industry. Skyjack prides itself on being simply reliable and easy to do business with. This mission extends to the relationships with customers, suppliers, and employees.
斯凯杰科(Skyjack)是一家为全球建设租赁公司提供具有高品质工程设计的、易操作、易接入、安全可靠的伸缩臂叉车设备的制造企业。从1985年创立之初的剪刀式升降机制造商,已成长为全球范围内通用型移动升降工作平台(MEWP)行业的佼佼者。
作为一个不断发展的行业中的优势企业,斯凯杰科(Skyjack)的员工在吸收新信息的同时也渴望不断提升自己的专业水平。 2002年,斯凯杰科(Skyjack)成为利纳马集团(Linamar Corporation)的全资子公司,并一直能够利用优良的战略伙伴关系,以及母公司的整体战略规划,使其在激烈的市场竞争中长盛不衰。
Evaluate static and dynamic stability of Skyjack equipment through engineering calculations and testing in accordance with applicable Standards.
Develop testing equipment and test plans required for testing and validation
Develop and carry out validation and test procedures on various components and subsystems presently on Skyjack equipment with an emphasis on providing ideas and solutions to improve reliability and performance.
Document testing program findings through writing of comprehensive test reports and present findings to management and/or colleagues as required
Develop technical documentation required for formal certification.
Maintaining and updating test and data acquisition equipment inventory to ensure the most efficient validation procedures are utilized
Investigate equipment failures and difficulties to diagnose faulty operation and make recommendations for improvement.
Apply a wide variety of established or modified engineering methods or techniques with considerable independence of action.
Other duties as assigned
Credentials
Bachelor‘s degree or above
Engineering Degree in Mechanical Engineering or Electrical Engineering and preference will be given to candidates registered as a Professional Engineer in China.
Minimum 3 years of experience as a Test Engineer, Mechanical Engineer or Electrical
Design Engineer in a mobile/heavy equipment (or related) manufacturing environment.
Engineering calculation and testing experience essential
Design experience and 3D modeling experience essential
Strong trouble shooting attributes / skills
Working knowledge of PLC’s or other programmable devises an asset
Experience with data acquisition hardware / software (Labview, Somat) an asset
Experience with engineering software (MathCad, FEA, CFD, Automation Studio, Matlab Simulink) an asset
Troubleshooting of various control circuits, electrical and hydraulic systems an asset
Preference to have hands on experience with electrical, mechanical, hydraulic testing and development of electrical, mechanical, hydraulic test plans
Desired Characteristics
Excellent communication skills with the ability to work well with a cross functional technical team as well as with manufacturing personnel.
Ability to work effectively in groups and individually with minimal supervision
Confident working with instrumentation and measurement tools
Why this is an exciting opportunity
Working for Market professional Original Equipment Manufacturer (OEM).
Skyjack is part of Linamar Group with over 20,000 employees worldwide making your growth opportunity limitless. Robust onboarding program, we will train you.
Participating in the development of brand new products / machines.
Growth in test and validation engineering that provides a wide range of experience dealing with Skyjack's full product line. Our machine weights range from 2,000 lbs to 40,000 lbs (half a car to the size of 10+ cars).
Working towards your Professional Engineer designation reporting to a Professional Engineer and working on Engineering issues
Wide range of experience including dynamic stability, static stability and various performance and automated cycle testing (PLC programing, calculations, hydraulic and electrical design troubleshooting. Developing new design solutions, performing software and controller validation. Tipping Machines to find balancing points and their absolute limits).
Sharing your time between office work and hands on experience makes it very interesting
No repetitive boring work, every day is a new challenge, new product and a new opportunity
Limitless learning opportunities to be part of every design phase, technical challenges and resolutions including but not limited to: battery powered hydraulic drive, battery powered electric AC or DC drive, ICE diesel, dual fuel and hybrid technologies.
Great team environment, learning from each other and working with a technician to provide assistance.
Designing our own testing support equipment in the R&D machining shop including high tech water jet, plasma cutter, mills, lathe, break, welders, saws, sheer, etc.
Why Skyjack:
Community based outreach supporting both local and global initiatives and charities.
Social committees and sports teams.
Discounts for local vendors and events, including auto supplier discounts.
About Skyjack
Skyjack supplies construction rental companies globally with quality engineered, simple, and reliable access and telehandler equipment. Initially started as a scissor lift manufacturer in 1985.
As a dominant player in a consistently evolving industry, Skyjack employees thrive on absorbing new information and have a thirst for continuous improvement in their professional selves. In 2002 Skyjack became a part of the Linamar Corporation and has since been able to leverage strategic partnerships and use the guidance of their parent company to rapidly change the face of the access industry.
Every aspect of the company is deeply rooted in Skyjacks safety initiatives as this can be an extremely challenging industry. Skyjack prides itself on being simply reliable and easy to do business with. This mission extends to the relationships with customers, suppliers, and employees.
斯凯杰科(Skyjack)是一家为全球建设租赁公司提供具有高品质工程设计的、易操作、易接入、安全可靠的伸缩臂叉车设备的制造企业。从1985年创立之初的剪刀式升降机制造商,已成长为全球范围内通用型移动升降工作平台(MEWP)行业的佼佼者。
作为一个不断发展的行业中的优势企业,斯凯杰科(Skyjack)的员工在吸收新信息的同时也渴望不断提升自己的专业水平。 2002年,斯凯杰科(Skyjack)成为利纳马集团(Linamar Corporation)的全资子公司,并一直能够利用优良的战略伙伴关系,以及母公司的整体战略规划,使其在激烈的市场竞争中长盛不衰。
公司介绍
斯凯杰科(SKYJACK)于1985年建立,1994年在多伦多证交所成功上市,并于2001年成为利纳马集团的全资子公司,其2020年销售额达到15亿加元。在30余年的企业发展中,斯凯杰科已连续多年在《全球自行式高空作业平台制造商10强》中占据三甲,同时在2021年11月最近出炉的《全球工程机械50强制造商》位居第36名。公司主要产品包括剪叉式高空作业平台、曲臂式高空作业平台、伸缩直臂式高空作业平台以及伸缩臂叉装车等。目前,斯凯杰科在加拿大拥有2家工厂,在匈牙利有1家工厂,在世界多地设有仓库、售后中心或销售代表处。
项目注册资本3000万美元,总投资约9000万美元。项目拟分两期购地自建,合计购地约13万平方米。一期投资额约4000万美元,计划2023年完成建设并投产,主要产品为剪叉式和臂式高空作业平台;二期投资额约5000万美元,预计将于2025年启动建设,主要产品为臂式高空作业平台和伸缩臂叉装车。达产后,项目年产值约12亿元人民币,税收贡献约6900万元人民币。
项目注册资本3000万美元,总投资约9000万美元。项目拟分两期购地自建,合计购地约13万平方米。一期投资额约4000万美元,计划2023年完成建设并投产,主要产品为剪叉式和臂式高空作业平台;二期投资额约5000万美元,预计将于2025年启动建设,主要产品为臂式高空作业平台和伸缩臂叉装车。达产后,项目年产值约12亿元人民币,税收贡献约6900万元人民币。
联系方式
- 公司地址:保税路·41号