上海招聘

The Customer Quality Leader has a critical role within the organization. In their position, they are one of the 1st direct interfaces with the customer. The CQL will oversee and/or perform quality activities for a customer(s), a process/cell or work unit, commodity or set of suppliers. Their work directly impacts customer satisfaction, product quality and Cost of Poor Quality. Depending on their role the CQL will have direct & frequent customer contact, supplier contact and/or internal cross-functional impact.

Description

• Lead customer satisfaction for specific customer (s) driving corrective action and continual improvement.

• Communicates all customer specific requirements to the different functions within Garrett, be the face of Garrett with the customer.

• Successfully interface with the customer’s Supplier Quality Engineer and others concerned within Garrett quality. Must have experience and competency to work on a peer level with customer personnel. Responds quickly and effectively to customer issues and requests.

• Track & report key customer quality metrics (e.g. PPM, 8D/CAR response, 12MIS r/1000, warranty cost) keeping internal data aligned with the customer’s view.

• The CQL must use all the available tools, FORMs, templates within the QMS to drive and track improvements.

• Responsible to achieve factory quality metrics for end items, Interco and overall.

• Assures that all customers required quality documentation is completed and stored in applicable systems for retrieval and audit as needed.

• Oversee and validate prototype quality planning per customer/engineering requirement.

• Oversee and validate 8D/CAR effectiveness which was driven by plant quality (CQI/CQC) and field service (FIR). Drive permanent corrective action in terms of design change, components development.

• Responsible for launch quality assurance, risk assessment of technical proposal, joint review of design review, Pre-ERR, ERR and risk letter. Support product assurance and engineering for launch issue resolution (LIR).

• In conjunction with NPI Engineer and Program Manager, the CQL is responsible from central Quality side for the pilot runs of new launches, assuring that proper controls are in place and secure plant quality team receive lessons learn and customer special requirement.

• Support PEP phase 3-6 projects. Responsible for validate customer and internally required quality deliverables such as, PPAP, ECN, etc.

• Leading critical customer audit with the support from global quality system team. Connect with sister plant to get best practice and quality standard.

• Supports customer field returns review and warranty analysis activities. Ensures reviews are performed on a timely basis, with proper rigor, and that resultant data and information is entered into relevant systems and communicated.

• Communicate, document and assure that all customer specific requirements, critical information, incidents and risks that concern their customer with the objective of achieving customer satisfaction with Garrett quality organization. ETE quality database maintain and update.

• The critical metrics for the CQL are as follows

1. Overall PPM (External & InterCo), Customer PPM

2. Customer Incidents (External and InterCo), Customer Concerns (External and InterCo)

3. PPAP & Audit Performance (External and InterCo)

4. LIR & FIR On-time Closure Rate

Qualifications

• University education majored in mechanical engineering or industrial engineering

• 5 - 8 years relevant working experience as a Customer Quality Engineer working with large OEM’s preferable

• Experience in manufacturing processes with emphasis on process design and process validation

• Experience in process improvement, statistical techniques for process improvement, development of PFMEA's, Control Plans, Gage Plans

• Excellent knowledge of APQP/PPAP/FMEA/SPC/MSA

• Validation Studies, Corrective Action and Mistake Proofing

• Good understanding of GD&T and reading of engineering drawings

• Experience in assembly and machining processes with focus on process control and elimination of defects

• Experience in Lean Manufacturing and application for reduction of defects and waste - ability to proactively work with manufacturing engineering to improve processes, maintain stability with focus on zero defects to our customers and reduction of waste and scrap internally

• Experience in Quality Systems TS16949 preferable

Skills

• Assertive in representing customer internally and GARRETT externally.

• Willing and confident to make commitments.

• Good English skill in reading and writing, good English speaking is preferable.

• Good computer operating skill in MS Office environment.

• Green belt certificate.

• Responsive and responsible to deliver on commitments.

• Strong communicator, externally and internally.

• Well organized to manage multiple competing priorities in parallel.

• Motivates and influences others without direct authority.

盖瑞特是汽车涡轮增压的真正先驱，其历史可追溯到60多年前，并在今天继续作为世界领先的涡轮增压技术解决方案和经验丰富的电动增压产品和汽车软件供应商，以支持乘用车、商用车和非道路车辆设备。拥有遍布全球的工程中心、测试实验室和制造工厂，盖瑞特为所有主流汽车公司提供差异化技术服务。盖瑞特提供前所未有的机遇与挑战，把你的激情带到快节奏和专业的工作氛围中。

盖瑞特公司介绍：

全球汽车行业差异化创新技术的领导者盖瑞特，前身为霍尼韦尔交通系统部门，于2018年10月1日正式从霍尼韦尔集团完成拆分，成为一家独立公司并在纽交所成功上去（纽交所上市代码: GTX）。公司主要产品组合包括涡轮增压器、适用于混动和氢燃料汽车的电动增压器和汽车软件方案，致力于提供差异化的先进技术，让车辆更安全、更互联、更高效、更环保。公司总部位于瑞士罗尔，为全球各地的乘用车、商用车、售后替换市场和赛车改装客户服务已超过65年。
在中国，公司拥有近1000名员工，包含超过200人的工程研发团队，具备研发、工程、市场、商务、生产、供应链等全面的端到端客户服务能力，与国内30多家主机厂客户建立了深厚和广泛的合作关系，不仅为传统汽油、柴油、天然气和混动及氢燃料汽车等新能源汽车提供广泛产品线的涡轮增压及电动增压技术，还提供智能网联汽车安全和车辆健康管理解决方案。公司在全球范围内第二大规模，拥有主机台架测试能力的涡轮增压实验室也设立在上海研发中心，并已运营近15年。
立足于 “东方服务于东方” 的市场战略，基于本土客户的开发需求，公司研发中心打造端到端的本土开发工程能力，快速响应中国客户需求，提供高可靠性、高效节能减排的汽油和柴油发动机涡轮增压器，满足国六标准，全力支持中国客户打赢蓝天保卫战。
公司荣获多项客户认可和“中国汽车零部件百强企业”、“浦东先进制造20强”、“浦东新区先进制造企业突出贡献奖”等多项行业和政府机构荣誉。
在汽车行业迅猛的局势变革中，公司提供给员工有潜力的发展空间与国际化的工作平台，有规范完整的福利体系，崇尚多元与包容，鼓励创新和协作，并构建一个在诚信和尊重基础上的工作环境。