高级设备工程师－senior mechanic engineer chemical project
上海升特企业管理咨询有限公司
- 公司规模：少于50人
- 公司性质：合资(非欧美)
- 公司行业：专业服务(咨询、人力资源、财会) 互联网/电子商务
职位信息
- 发布日期：2012-08-17
- 工作地点：上海
- 招聘人数：1
- 工作经验：八年以上
- 学历要求：本科
- 职位类别：工程/设备工程师 工程/设备经理
职位描述
Job Responsibilities:
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
Job Responsibilities:
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
o Experience with Root Cause Analysis (RCA) using fault trees, fishbone diagrams, or other structured problem solving techniques and Reliability Centered Maintenance (RCM), as part of the continuous improvement process for existing equipment, as well as incorporating the improvements into capital project designs to eliminate repeat failures.
o Facilitation of RCM and successful execution and follow up on the deliverables such as: precision check out points, design changes, corrective actions, equipment strategies, troubleshooting guides, etc.
? Strong analytical and field troubleshooting skills, especially with rotating equipment that is not meeting design function parameters.
? Committed to and encourages others to use Documentation Systems such as SAP PM, etc
? Start Up/Commissioning experience to include:
Job Responsibilities:
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
o Experience with Root Cause Analysis (RCA) using fault trees, fishbone diagrams, or other structured problem solving techniques and Reliability Centered Maintenance (RCM), as part of the continuous improvement process for existing equipment, as well as incorporating the improvements into capital project designs to eliminate repeat failures.
o Facilitation of RCM and successful execution and follow up on the deliverables such as: precision check out points, design changes, corrective actions, equipment strategies, troubleshooting guides, etc.
? Strong analytical and field troubleshooting skills, especially with rotating equipment that is not meeting design function parameters.
? Committed to and encourages others to use Documentation Systems such as SAP PM, etc
? Start Up/Commissioning experience to include:
Job Responsibilities:
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
-Experience with Root Cause Analysis (RCA) using fault trees, fishbone diagrams, or other structured problem solving techniques and Reliability Centered Maintenance (RCM), as part of the continuous improvement process for existing equipment, as well as incorporating the improvements into capital project designs to eliminate repeat failures.
-Facilitation of RCM and successful execution and follow up on the deliverables such as: precision check out points, design changes, corrective actions, equipment strategies, troubleshooting guides, etc.
? Strong analytical and field troubleshooting skills, especially with rotating equipment that is not meeting design function parameters.
? Committed to and encourages others to use Documentation Systems such as SAP PM, etc
? Start Up/Commissioning experience to include:
-Verification and documentation of the operational frequencies of large rotating equipment (gear mesh, vane pass, etc ) against the natural frequencies of structural assets (piping, structural steel, etc.)
-Familiarity with precision balancing, laser alignment, oil analysis, vibration analysis, infrared thermography and precision installation of rotating equipment.
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
Job Responsibilities:
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
o Experience with Root Cause Analysis (RCA) using fault trees, fishbone diagrams, or other structured problem solving techniques and Reliability Centered Maintenance (RCM), as part of the continuous improvement process for existing equipment, as well as incorporating the improvements into capital project designs to eliminate repeat failures.
o Facilitation of RCM and successful execution and follow up on the deliverables such as: precision check out points, design changes, corrective actions, equipment strategies, troubleshooting guides, etc.
? Strong analytical and field troubleshooting skills, especially with rotating equipment that is not meeting design function parameters.
? Committed to and encourages others to use Documentation Systems such as SAP PM, etc
? Start Up/Commissioning experience to include:
Job Responsibilities:
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
o Experience with Root Cause Analysis (RCA) using fault trees, fishbone diagrams, or other structured problem solving techniques and Reliability Centered Maintenance (RCM), as part of the continuous improvement process for existing equipment, as well as incorporating the improvements into capital project designs to eliminate repeat failures.
o Facilitation of RCM and successful execution and follow up on the deliverables such as: precision check out points, design changes, corrective actions, equipment strategies, troubleshooting guides, etc.
? Strong analytical and field troubleshooting skills, especially with rotating equipment that is not meeting design function parameters.
? Committed to and encourages others to use Documentation Systems such as SAP PM, etc
? Start Up/Commissioning experience to include:
Job Responsibilities:
This position will offer the opportunity to utilize and expand your background in Mechanical Engineering. You will work on a cross functional project team and be involved in the design, fabrication and engineering of mechanical rotating equipment (high pressure centrifugal and reciprocal pumps, etc) . Your responsibilities will include:
? Development of the mechanical design specifications and standards strategy for the project combining Chinese codal requirements with company best practices.
? Support early design activities with identification and application / selection of appropriate and justifiable equipment technologies
? Provide technical expertise to specify, purchase, and install equipment to meet long term equipment reliability objectives and ensure lowest total life cycle cost
? Establish appropriate strategies for vendor qualification and appropriate quality control for equipment purchases from a Total Life Cycle Cost perspective.
? Provide engineering oversight to ensure that contract design activities meet COMPANY expectations for compliance, Environmental Health and Safety (EH&S), quality control and work productivity.
? Provide and support equipment management strategies and critical spare parts inventory strategies as part of project deliverables, focused on meeting or exceeding overall plant availability target.
? Review vendor offerings (drawings, specifications) for equipment to ensure compliance to specifications and work with 3rd parties to select optimal engineering solutions.
? Teaming with Operations personnel in the development of operating and maintenance procedures that will improve and sustain breakthroughs in: Reliability, EH&S, and Productivity
? Provision of training on the equipment, maintenance and operating procedures
? Develop the Precision Checkout / Approval sheets to verify high quality installation and oversight for construction of new equipment
Experience and Skills Required:
? Demonstrated leadership, planning and organizational, problem solving, decision making, and critical decision making skills are required. Ability to apply persuasion and influence to create positive change in supporting departments without direct authority.
? Bachelor's degree or higher in Mechanical Engineering
? 8+ years experience within the Rotating and Fixed Equipment discipline directing the specification, design, fabrication, erection and maintenance of equipment in the chemical, petrochemical or refining industry.
? Experience and knowledge of applicable industry standards including GB (Chinese), ANSI, ASME, API, and PIP
? Experience with machinery surveillance and condition monitoring including: vibration analysis, oil analysis, etc.
? Knowledge in the specification, selection and design of: compressors (centrifugal, reciprocating), pumps (centrifugal and positive displacement), vacuum pumps, agitators/mixers, seals, lubrication systems, and vibration analysis.
? General familiarity with motors, gearboxes, fasteners, bearings, lubrication, piping, hydraulics, and pneumatics.
Experience and Skills Preferred:
? 12+ years capital projects experience with a corporation or owner company
? Leadership position within the mechanical discipline on a large (>US$100MM) project.
? Experience in the specification, design, fabrication, erection and maintenance of high pressure (approx 5000PSI or greater) positive displacement equipment for gases and liquids in the chemical, petrochemical or refining industry
? Knowledge of Finite Element Analysis and its application to rotating equipment.
? Experience with the operation, troubleshooting, repair and proactive management of rotating equipment, specifically:
-Experience with Root Cause Analysis (RCA) using fault trees, fishbone diagrams, or other structured problem solving techniques and Reliability Centered Maintenance (RCM), as part of the continuous improvement process for existing equipment, as well as incorporating the improvements into capital project designs to eliminate repeat failures.
-Facilitation of RCM and successful execution and follow up on the deliverables such as: precision check out points, design changes, corrective actions, equipment strategies, troubleshooting guides, etc.
? Strong analytical and field troubleshooting skills, especially with rotating equipment that is not meeting design function parameters.
? Committed to and encourages others to use Documentation Systems such as SAP PM, etc
? Start Up/Commissioning experience to include:
-Verification and documentation of the operational frequencies of large rotating equipment (gear mesh, vane pass, etc ) against the natural frequencies of structural assets (piping, structural steel, etc.)
-Familiarity with precision balancing, laser alignment, oil analysis, vibration analysis, infrared thermography and precision installation of rotating equipment.
公司介绍
Focus enables us to explore further and deeper.
专注使我们更长远，更深入。
升特（Center）企业管理咨询有限公司是一家专业从事人力资源咨询、猎头服务、职业规划和人才测评的一流人力资源服务机构.
升特（Center）作为专业猎头公司，我们针对不同风格的企业与行业用专业化的细分方案与解决方案来提供卓越的服务。公司注重对候选人的内在、外在及多方面进行符合性分析,严格甄选合适企业的人选.
升特（Center）致力于在最短的时间内帮助客户获得最合适的人才，完善人力资源方案.
升特（Center）四一文化
一个信仰----追求品德高尚。无论是客户、候选人及员工，诚信为本。
一所学校----力求学术精通。工欲善其事必先利其器，技能提升让我们游刃有余。
一支军队---- 要求勇往直前，有勇气、不放弃。
一个家庭---- 寻求大度宽容，互帮互助，相亲相爱。
Center Associates Co., Ltd.
www.stcenter.com.cn
专注使我们更长远，更深入。
升特（Center）企业管理咨询有限公司是一家专业从事人力资源咨询、猎头服务、职业规划和人才测评的一流人力资源服务机构.
升特（Center）作为专业猎头公司，我们针对不同风格的企业与行业用专业化的细分方案与解决方案来提供卓越的服务。公司注重对候选人的内在、外在及多方面进行符合性分析,严格甄选合适企业的人选.
升特（Center）致力于在最短的时间内帮助客户获得最合适的人才，完善人力资源方案.
升特（Center）四一文化
一个信仰----追求品德高尚。无论是客户、候选人及员工，诚信为本。
一所学校----力求学术精通。工欲善其事必先利其器，技能提升让我们游刃有余。
一支军队---- 要求勇往直前，有勇气、不放弃。
一个家庭---- 寻求大度宽容，互帮互助，相亲相爱。
Center Associates Co., Ltd.
www.stcenter.com.cn
联系方式
- 联系人：Lily Tang