上海招聘

职位描述：

1. General

a. Area of responsibility: Supplier Quality within assigned projects

b. Direct Superior: Director Supplier Quality BA

c. Location: TBD

2. Main Objectives

? To complete pro-active and escalated re-active quality assurance activities as dictated by the needs of the business:

? Pro Active :

o To ensure that our suppliers follow APQP processes to improve the supplied quality delivered into KA plants.

o Development of the Suppliers by following the KBD-NPI or NPI process for new products in development and the PIP process for modifications.

o To ensure feasibility issues reported by the supplier are reviewed and resolved as early as possible in the process

o To perform risk assessment and create, release and follow the Purchasing QAP (FO-PU-029-KA) form for each component in their field of activity.

o Improvement of the Supply Base performing, for example, on-site Run@Rate, process audits (VDA 6.3) and / or system audits as required by projects needs.

o Keep up-to-date the Project Parts Lists for each project (NPI and PIP) until PPAP approval for serial production.

? Reactive :

o To resolve issues within launch phase to SOP + 90 days period, and/or until passing Gate 6 of the NPI process.

o Depending on the case, to support Commodity SQD Engineers on escalated level 3 cases with current production parts

o To support / coordinate SRT cases when required.

o To support Commodity SQD Engineer with annual suppliers audit when requested.

3. Area of Responsibility

? To ensure that all purchased parts are PPAP approved to the appropriate level.

? To create, maintain up-to-date and release, in a timely manner, an Open Issue List for each project and / or supplier (Project follow-up).

? To track any delays and issues in the Supplier’s process development and product conformity and ensure all analysis and recovery action plans are released and updated in a timely manner to avoid any delay in the PPAP submission date.

? To report immediately to his direct manager and functional manager any risk (Quality, Delay, Capacity, etc ) on the projects he is responsible for and propose solutions.

? To develop and implement incoming inspection together with the receiving plant if a supplier cannot ensure that their process is under control before serial production.

? To carry out system and process audits (VDA 6.3) at the suppliers' with reference to ISO 9000 and additional requirements specific to the customer and the company and also with reference to ISO/TS 16949 and ISO 14001.

? When necessary to perform other assignments in his/her sphere of qualifications and work.

4. Personal Tasks

? To report to the launch team within the plant, the project team and their direct manager to ensure that NPIs and PIPs are supported in a timely manner.

? To ensure feasibility is reviewed and risk assessment is carried out for all components requiring PPAP approval.

? To report the current status of all parts undergoing PPAP approval by proactive discussion with PIP, Launch and Project teams.

? In case they cannot solve issues highlighted during suppliers APQP process, to collate all information required for decision making and escalate as appropriate within the organisation.

? To propose continuous system improvements, specifically with regard to the SQD / purchasing process.

? To drive continuous improvements at the supplier.

5. Main Challenges

? To work pro-actively with the Launch team, Project Buyers, R&D and our suppliers to prevent future issues and misunderstandings, using for example, feasibility studies, drawing reviews and ECR.

? To escalate concerns within KA in a timely manner to avoid delays in projects.

? To develop and utilise effective measures to ensure continuous improvements at the supplier.

? To reduce the need for incoming inspection at KA.

? To utilise the systems and procedures to support the work of the purchasers, especially when sourcing new parts.

? To ensure that all purchased parts are approved to appropriate PPAP level on time.

6. Important External Contacts

? Customers (When requested as support to the plant launch teams)

? External service providers (e.g. third party auditors when requested)

? Suppliers, both internal and external.

7. Competence profile (ideal)

Education:Technical engineer.

Training in quality assurance, further training in measuring engineering, print interpretation, tolerances of form and position and training in auditing.

VDA 6.3 Certified Auditor,

Auditor for ISO / TS 16949 / ISO 9001 / ISO 14001 is considered additional qualification

Practical experience:At least five years’ experience in manufacturing industry, preferably in production engineering or quality engineering.

Languages:Have a good command of written and spoken English. Further linguistic skills are considered an additional qualification.

Special requirements: Reporting

Supplier process audits (1st and 2nd party auditor) VDA 6.3

Relevant quality tools and techniques (APQP, PPAP, root cause analysis, 8D, etc...)

Computer skills including MS Office

High degree of personal integrity and confidence

Good conflict management skills

Facilitation skills with a high focus on solutions

Frequent travel as required

8. Authority

? To implement the supplier quality strategy as defined.

? To use Customer specific supplier quality documents when KA standards cannot apply.

? To represent KA in front of the suppliers and drive necessary actions to protect KA and its customers.

? To approve current suppliers, processes and parts after having performed an audit of the supplier.

? To act independently within the scope of the current rules of the company (SQM, CoC, …).

举报 分享

Kongsberg Automotive (KA) was founded on 24 March 1987, is headquartered in Kongsberg, Norway, and has almost 50 facilities in 35 countries, and approx. 10,000 employees, provides system solutions to vehicle makers around the world.

Our product, Safety and comfort related products for vehicle interiors, including Head restraints, lumbar support systems and seat climate systems; Gear shift systems for light duty vehicles, including Automatic and manual gear shifters, shift cables and gear selectors; Operator control systems and chassis related products to commercial vehicles, including Gear shifters, clutch servos, steering columns and chassis stabilizers; Fluid handling systems for light duty, industrial and commercial vehicles, including Pipe and hose assemblies for turbo chargers, brake- and fuel systems.

We shall have a leading position in Gearshifts, Seat Comfort and Commercial Vehicle System, and focus on business areas with considerable growth potential. With the market increasing in China, we are appreciated you could take this opportunity to join us and grow up with KA together.

康斯博格集团成立于1987年3月24日，总部位于挪威，在全球35多个国家有近50个分公司，拥有10000名员工、为世界各地的汽车制造商提供系统解决方案的企业。
在中国区域，我们设有三个工厂，他们分别是：
康斯博格汽车部件（无锡）有限公司
上海隆福拉索有限公司
上海东风康斯博格莫尔斯控制系统有限公司

我们的产品主要有一安全舒适的汽车内饰产品，包括头枕，腰托系统以及座垫加热系统；二轻型汽车的排挡系统，包括手动、自动排挡，拉索以及齿轮选择器；三商用车上的操作控制系统以及底盘产品，包括排挡，离合器伺服缸，转向柱以及底盘稳定系统；四轻型工业用和商用汽车的流体处理系统，包括涡轮增压产品，制动与燃油系统的软管总成。

我们在变速器、舒适型座椅和商用车辆体系居同行业领先地位，并以巨大的增长潜力关注商业车领域。随着中国市场的拓展，我们期待您的加入并且希望您与我们一起成长。