青岛招聘

职位描述：
职位描述：
1. Be responsible for the customs declaration, inspection of the company’s exports/ imports, and examination, preparation, application of various documents.
    负责进出口货品的清关、查验及各种单证的审核和编制，办理和申请。
2. Coordinate company internal declaration issues with customs, customs specialist, and commodity inspection authority.
    负责与海关、报关员、商检协调公司内部清关事宜。
3. Collect verifying and writing-off instruments and other relevant documents in time.
    及时收回核销单及相应文件。
4. Assist the customs specialist in completing the list of products and other matters.
    协助报关员完成货品清单的其他事宜。
5. Responsible for the goods logistics, optimize the storage & library control management; save logistics cost and make sure the goods arrive in time.
    负责货品物流、入库、出库优化控制管理，节省物流成本及货物按时到达目的地。
6. Collection of receipts (documents, express, waybill, etc.)
    负责公司文件、快递、运单回签收集。

岗位要求：
1. Associate or above degree in international trade or logistics, etc.
    大专及以上学历，国际贸易、物流类相关专业
2. Familiar with relevant customs declaration procedures, and applicable laws and regulations, holder of Customs declaration certificate will be a plus
    熟悉相关报关流程，熟悉相应的国家法律法规，持有报关员资格证者优先考虑
3. More than one year’s relevant work experience, work experience in relevant position in FIE will be a plus
    一年以上相关领域工作经验，有外企相关领域工作经历者优先考虑
4. Good communication and problem solving ability, proficient in spoken and written English
    具备一定的沟通及处理问题的能力，良好的英语听说读写能力
5. Positive, honest and careful
    积极主动、为人正直，工作细心负责 举报 分享

MISSION

The INglass-HRSFlow mission comprises a non-stop search for innovative solutions to simplify production processes, reduce costs and improve the quality of the final molded part. INglass-HRSFlow takes an innovative approach to the customer, which involves not only preliminary product analysis but also a careful selection of the most appropriate technology to use from the very initial project stages. This enables the customer to:

 Cut down cycle time.
 Reduce production scrap, defects and wastage.

Benefits that allow cost reductions to be made throughout the entire molding process.

PROFILE

 The INglass-HRSFlow group, based in San Polo di Piave, was founded as Incos in 1987, with main activities comprising the design and manufacture of molds for the plastics industry
 1991 witnessed INglass-HRSFlow focusing its attention on rotating multicolour and multicomponent molds for automotive lighting.
 2001 gave birth to the HRSFlow division targeted exclusively on the planning, design, and implementation of hot runner systems for plastic injection molding.
 2004 setting up of the INglass division dedicated to injection compression molding technology and the production of large transparent polycarbonate surfaces as an alternative to glass products for the Automotive industry (Plastic Glazing).
 2004 the Technological Automation Unit was set up in order to deal with the research, development and production of control units to allow operators total control of the molding process.
 Since 2007, INglass-HRSFlow has been able to offer customers a service aimed at optimising mold cooling time by means of mold cooling analysis and, if required, the production of tailor-made inserts using SLM - Selective Laser Melting (laser-melted metal powder) technology.
 2009 opening of a new production plant for hot runner systems in China - Hangzhou to serve the high demanding Asian markets like Japan, Korea and Taiwan,
In the same year, gave birth to the HRSmultitech line, that offers the perfect solution for high- performance systems catering to large production volumes involving reduced part weight or thickness and technically-advanced materials.
 2012 opening of a new branch in India

INglass-HRSFlow is currently in the enviable position of being not only the simple supplier of molds and hot runner systems but also a real business partner capable of helping customers take critical decisions along the entire production chain and, consequently, putting them in the position to face the challenges of an ever-changing market.

宗旨

英格斯-好塑（INglass-HRSflow）不断探索创新性的解决方案，致力于简化生产流程，降低成本，提高最终成型产品质量。英格斯-好塑为客户提供全面的创新服务，不仅包括最初产品分析，并且在项目初始阶段仔细挑选最适合客户的应用技术。

这能帮助客户：
缩短生产周期
减少生产废弃、缺陷及耗损

这些益处贯穿整个模具成型流程，帮助客户降低成本。

简介

英格斯-好塑总部位于意大利San Polo di Piave，创建于1987年，成立之初名为Incos，主要为塑料行业设计及生产模具。
1991年，英格斯-好塑开始致力于生产用于汽车照明（前后车灯）的旋转式多色多组件模具。
2001年，成立好塑（HRSflow）分部，专门设计并生产用于塑料注塑成型的热流道系统。
2004年，成立英格斯（INglass）分部，专注于注射压缩成型技术，生产高透明度的PC表面（聚碳酸酯表面），为汽车工业的玻璃制品提供另一种选择（Plastic Glazing）。
2004年，成立技术自动化部门，负责控制器的研发生产，帮助工作人员全程管理成型过程。
2007年，英格斯-好塑可以通过模具冷却分析为客户提供模具冷却优化服务，并且可根据客户要求，为客户提供采用SLM技术的定制镶件。（Selective Laser Melting Technology：选择性激光熔融技术，激光熔融金属粉末）
2009年，在中国杭州建立新的热流道系统生产工厂，为亚洲市场提供高质高效服务，涵盖日本、韩国、中国台湾、马来西亚等。
同年推出的HRS Multitech多腔系列，为要求能够大批量生产、减少塑件重量或壁厚、适用高技术材料的高性能系统，提供了完美的解决方案。
2012年，成立印度分公司。

英格斯-好塑的多重角色使其处在一个令人羡慕的位置上。它不止是单一的模具和热流道系统供应商，更是客户的理想合作伙伴，能够在生产链全程帮助客户作出关键性决策。正因如此，英格斯-好塑从而才能够面对不断变化的市场所带来的挑战。

更多信息敬请访问英格斯及好塑网站
http://www.inglass.it
**********************