QA/QC Engineer QA/QC工程师
青岛武船麦克德莫特海洋工程有限公司
- 公司规模：500-1000人
- 公司性质：合资(欧美)
- 公司行业：机械/设备/重工
职位信息
- 发布日期：2013-07-04
- 工作地点：青岛
- 招聘人数：1
- 工作经验：三年以上
- 学历要求：本科
- 语言要求：英语良好
- 职位类别：质量管理/测试工程师(QA/QC工程师)
职位描述
PURPOSE OF THE JOB:
Lead QC function & implementation. Directly responsible to ensure technical compliance of project quality to the requirements of the contract. This will involve going through the contract, specification and determining QC scope, preparation of ITP, project procedures.
Main Duties of the Jobholder:
1. Develop Project Quality Plan to cover all customer requirements to a level of detail necessary to assure integration within the Project Quality Plan.
2. Determine & formalize project QC requirements.
3. Prepare ITP and monitor ITP implementation throughout the project cycle.
4. Determine NDT requirements as per project contract/specification and Issue NDT drawings.
5. Supervise the CIR compilation (production QC records) and entry to PCM system.
6. Oversee the project fabrication to verify compliance per project requirements.
7. Issue NCR/CAR for non compliance to QC requirements. Follow-up to ensure closure and preventive/corrective action.
8. Monitor Weld repair rates to ensure project fabrication meets to corporate goals.
9. Participate in project Quality audits.
10. Perform audits of sub contractors, vendors and suppliers to establish Approved Vendors List.
11. Assure through proper utilization of auditor resources and audit verification the effective execution of the QC system.
12. Liaise with the Certifying Authority on documents specified to seek verification, assessment and appraisal of their conformity and fitness to the codes and regulations.
13. Prepare Quality related lessons-learned through project Close-out Report to ensure preventive measures are deployed.
14. Provide data for Management Review of the Management System to present effectiveness of the system, areas of reoccurring deficiencies and areas for improvement. Proposes recommended goals with senior area management for continual improvement.
15. Conduct preventive action analysis to determine root cause and the necessary measure to avoid re-occurrence.
16. Initiate Quality Planning for the project to assure compliance first time through proactive and preventive measures and consults with the Quality Manager concerning prevention and appraisal resources and the effectiveness of project Quality Plan/Procedures necessary to achieve the product quality.
17. 'Participate in the Contract Review (kick-off meeting) to identity the "key factors for success" plus the risks and define / implement preventive action. Identify issues and concerns.
18. Liaise with the QC / NDT / Certification Personnel and Customer to ensure that Quality problems are addressed and technically resolved.
19. Liaise with Engineering groups, PMT, Purchasing, Inspection and customer to ensure customer spec requirements are integrated into the Engineering and Vendor data documents of supplied products.
20. Administer the vendor inspection process through the assigned coordinator.
21. Oversee the As Built Project Certification as it is progressed through work approval packages and monitors progress/status of mechanical completion.
Requirements:
1. Relevant working experience in Construction/Fabrication/Projects in Oil & Gas Industry.
Degree in related discipline with knowledge of fabrication/projects as per codes & standards like AWS D1.1, ASME B31.3/B31.8, API-2A/2B, ASME B&PVC Section-IX/II(Part-C)/ VIII (Div-I, II), API 1104.
2. Good command of spoken and written Chinese and English
Good technical writing and computer skills
3. Should be assertive towards effective implementation of Quality Goals.
Should have previous relevant experience.
4. Min. 3/5 yrs hands-on experience in Fabrication industry having exposure to Inspection, NDT, Blasting & Painting, E&I, Certification, Punch-list preparation & follow up, Preparation of ITP, NDT maps/drawings, QA/QC procedures as per Fabrication / Inspection / codes & corporate procedures. Should be able to review Piping test packs & NDT reports, Liaise with NDT subcon on day-to-day basis. Supervision of Inspection generated reports to ensure compilation of project dossiers.
5. Masters or Bachelor Degree in Welding / Metallurgy / Materials Science / Mechanical (or relevant) with additional Certifications - Welding: IWE, Inspection: AWS-CWI/SCWI or CSWIP3.1/3.2; NDT Level-II; Coating: NACE/BGAS/FROTIO; Lead/Internal Auditor.
Lead QC function & implementation. Directly responsible to ensure technical compliance of project quality to the requirements of the contract. This will involve going through the contract, specification and determining QC scope, preparation of ITP, project procedures.
Main Duties of the Jobholder:
1. Develop Project Quality Plan to cover all customer requirements to a level of detail necessary to assure integration within the Project Quality Plan.
2. Determine & formalize project QC requirements.
3. Prepare ITP and monitor ITP implementation throughout the project cycle.
4. Determine NDT requirements as per project contract/specification and Issue NDT drawings.
5. Supervise the CIR compilation (production QC records) and entry to PCM system.
6. Oversee the project fabrication to verify compliance per project requirements.
7. Issue NCR/CAR for non compliance to QC requirements. Follow-up to ensure closure and preventive/corrective action.
8. Monitor Weld repair rates to ensure project fabrication meets to corporate goals.
9. Participate in project Quality audits.
10. Perform audits of sub contractors, vendors and suppliers to establish Approved Vendors List.
11. Assure through proper utilization of auditor resources and audit verification the effective execution of the QC system.
12. Liaise with the Certifying Authority on documents specified to seek verification, assessment and appraisal of their conformity and fitness to the codes and regulations.
13. Prepare Quality related lessons-learned through project Close-out Report to ensure preventive measures are deployed.
14. Provide data for Management Review of the Management System to present effectiveness of the system, areas of reoccurring deficiencies and areas for improvement. Proposes recommended goals with senior area management for continual improvement.
15. Conduct preventive action analysis to determine root cause and the necessary measure to avoid re-occurrence.
16. Initiate Quality Planning for the project to assure compliance first time through proactive and preventive measures and consults with the Quality Manager concerning prevention and appraisal resources and the effectiveness of project Quality Plan/Procedures necessary to achieve the product quality.
17. 'Participate in the Contract Review (kick-off meeting) to identity the "key factors for success" plus the risks and define / implement preventive action. Identify issues and concerns.
18. Liaise with the QC / NDT / Certification Personnel and Customer to ensure that Quality problems are addressed and technically resolved.
19. Liaise with Engineering groups, PMT, Purchasing, Inspection and customer to ensure customer spec requirements are integrated into the Engineering and Vendor data documents of supplied products.
20. Administer the vendor inspection process through the assigned coordinator.
21. Oversee the As Built Project Certification as it is progressed through work approval packages and monitors progress/status of mechanical completion.
Requirements:
1. Relevant working experience in Construction/Fabrication/Projects in Oil & Gas Industry.
Degree in related discipline with knowledge of fabrication/projects as per codes & standards like AWS D1.1, ASME B31.3/B31.8, API-2A/2B, ASME B&PVC Section-IX/II(Part-C)/ VIII (Div-I, II), API 1104.
2. Good command of spoken and written Chinese and English
Good technical writing and computer skills
3. Should be assertive towards effective implementation of Quality Goals.
Should have previous relevant experience.
4. Min. 3/5 yrs hands-on experience in Fabrication industry having exposure to Inspection, NDT, Blasting & Painting, E&I, Certification, Punch-list preparation & follow up, Preparation of ITP, NDT maps/drawings, QA/QC procedures as per Fabrication / Inspection / codes & corporate procedures. Should be able to review Piping test packs & NDT reports, Liaise with NDT subcon on day-to-day basis. Supervision of Inspection generated reports to ensure compilation of project dossiers.
5. Masters or Bachelor Degree in Welding / Metallurgy / Materials Science / Mechanical (or relevant) with additional Certifications - Welding: IWE, Inspection: AWS-CWI/SCWI or CSWIP3.1/3.2; NDT Level-II; Coating: NACE/BGAS/FROTIO; Lead/Internal Auditor.
公司介绍
青岛武船麦克德莫特海洋工程有限公司(简称 QMW) 是由中船重工集团 (CSIC) 的全资子公司武昌船舶重工有限责任公司和McDermott International Inc. (MII) 的全资子公司J. Ray McDermott Qingdao Pte. Ltd (McDermott) 于2008年共同出资组建的合资公司，双方各拥有股权50%。 2009年开始投入建造，45公顷的建造厂区位于青岛黄岛区胶州湾海海底隧道口处， 并且毗连CSIC的北海造船厂，是海西湾船舶建造、修理基地的一部分。
合资公司将融合双方优势，麦克德莫特具有专利建造系统，程序，管理模式以及丰富的国际客户服务经验；武船拥有有效的成本控制方式，丰富的浮体建造经验。合资企业的建造的产品包括：陆上或离岸的油气处理模块，综合一体化的平台， SPAR浮体， 大型的海上浮式油气处理和储存设施（FPSO）以及为国际市场包括亚洲，墨西哥湾，地中海，中东，南海，西非的客户提供FPSO的整体服务。合资厂也将努力进入中国的陆上和离岸市场。
QMW为员工建立多元化的职业发展阶梯及培训模式，并提供宽阔的个人发展平台及有竞争力的薪酬福利体系，让员工充分展现自己的才华，不断地提升自身价值并享受与公司共同发展的成果。QMW欢迎社会各位优秀人才的加入！
公司网站：*******************************
地址：青岛经济技术开发区漓江东路367号
合资公司将融合双方优势，麦克德莫特具有专利建造系统，程序，管理模式以及丰富的国际客户服务经验；武船拥有有效的成本控制方式，丰富的浮体建造经验。合资企业的建造的产品包括：陆上或离岸的油气处理模块，综合一体化的平台， SPAR浮体， 大型的海上浮式油气处理和储存设施（FPSO）以及为国际市场包括亚洲，墨西哥湾，地中海，中东，南海，西非的客户提供FPSO的整体服务。合资厂也将努力进入中国的陆上和离岸市场。
QMW为员工建立多元化的职业发展阶梯及培训模式，并提供宽阔的个人发展平台及有竞争力的薪酬福利体系，让员工充分展现自己的才华，不断地提升自身价值并享受与公司共同发展的成果。QMW欢迎社会各位优秀人才的加入！
公司网站：*******************************
地址：青岛经济技术开发区漓江东路367号
联系方式
- Email：QDRecruitment@mcdermottwuchuan.com
- 公司地址：青岛开发区漓江东路367号 (邮编：266520)
- 电话：15871436140