Prodcut Engineer
南京优加明企业咨询有限公司
- 公司规模:少于50人
- 公司性质:民营公司
- 公司行业:专业服务(咨询、人力资源、财会)
职位信息
- 发布日期:2012-11-14
- 工作地点:南京-江宁区
- 招聘人数:若干
- 工作经验:三年以上
- 学历要求:本科
- 语言要求:英语良好
- 职位类别:产品工艺/制程工程师
职位描述
岗位描述:
1. Review客户的设计文件主要包括BOM,组装图,Gerber文件及电路图
2. 在SAP中发行BOM,同时管理ECN(工程变更)
3. 对客户端反馈的或者制成中发现的不良进行失效分析
4. 为新产品设计低成本,符合人体工学,高效安全的包装方式
5. 作为面对客户的一个技术窗口
6. 协调新产品验证
7. 负责元器件本地化
要求:
1. 本科及以上学历,电子,机械等相关专业
2. 三年以上电子成品设计或制造经验
3. 熟悉Auto CAD,Gerber tool, UG者优先
4. 熟练的英语听说读写能力
Job Description
Review design packaging from customer, mainly include BOM ,assembly drawing, Gerber file and Schematic
Prepare BOM in SAP and manage ECN(Engineering change notice)
Perform failure analysis regarding customer claims and production failures if and when found necessary
Develop cost-effective, ergonomic, efficient and safe packing solution for the new products.
To be the technical window person with customer
To be the coordinator for NPI product validation
To be in charge of components localization
Requirement
Bachelor degree or above, major in Electronics, mechanical or relative
3+ years design or manufacture experience in electronic products
Be familiar with Auto CAD , Gerber tool. UG is preferred.
Fluent English in Listening, Speaking, Reading and Writing
岗位描述:
1. Review客户的设计文件主要包括BOM,组装图,Gerber文件及电路图
2. 在SAP中发行BOM,同时管理ECN(工程变更)
3. 对客户端反馈的或者制成中发现的不良进行失效分析
4. 为新产品设计低成本,符合人体工学,高效安全的包装方式
5. 作为面对客户的一个技术窗口
6. 协调新产品验证
7. 负责元器件本地化
要求:
1. 本科及以上学历,电子,机械等相关专业
2. 三年以上电子成品设计或制造经验
3. 熟悉Auto CAD,Gerber tool, UG者优先
4. 熟练的英语听说读写能力
Job Description
Review design packaging from customer, mainly include BOM ,assembly drawing, Gerber file and Schematic
Prepare BOM in SAP and manage ECN(Engineering change notice)
Perform failure analysis regarding customer claims and production failures if and when found necessary
Develop cost-effective, ergonomic, efficient and safe packing solution for the new products.
To be the technical window person with customer
To be the coordinator for NPI product validation
To be in charge of components localization
Requirement
Bachelor degree or above, major in Electronics, mechanical or relative
3+ years design or manufacture experience in electronic products
Be familiar with Auto CAD , Gerber tool. UG is preferred.
Fluent English in Listening, Speaking, Reading and Writing
1. Review客户的设计文件主要包括BOM,组装图,Gerber文件及电路图
2. 在SAP中发行BOM,同时管理ECN(工程变更)
3. 对客户端反馈的或者制成中发现的不良进行失效分析
4. 为新产品设计低成本,符合人体工学,高效安全的包装方式
5. 作为面对客户的一个技术窗口
6. 协调新产品验证
7. 负责元器件本地化
要求:
1. 本科及以上学历,电子,机械等相关专业
2. 三年以上电子成品设计或制造经验
3. 熟悉Auto CAD,Gerber tool, UG者优先
4. 熟练的英语听说读写能力
Job Description
Review design packaging from customer, mainly include BOM ,assembly drawing, Gerber file and Schematic
Prepare BOM in SAP and manage ECN(Engineering change notice)
Perform failure analysis regarding customer claims and production failures if and when found necessary
Develop cost-effective, ergonomic, efficient and safe packing solution for the new products.
To be the technical window person with customer
To be the coordinator for NPI product validation
To be in charge of components localization
Requirement
Bachelor degree or above, major in Electronics, mechanical or relative
3+ years design or manufacture experience in electronic products
Be familiar with Auto CAD , Gerber tool. UG is preferred.
Fluent English in Listening, Speaking, Reading and Writing
岗位描述:
1. Review客户的设计文件主要包括BOM,组装图,Gerber文件及电路图
2. 在SAP中发行BOM,同时管理ECN(工程变更)
3. 对客户端反馈的或者制成中发现的不良进行失效分析
4. 为新产品设计低成本,符合人体工学,高效安全的包装方式
5. 作为面对客户的一个技术窗口
6. 协调新产品验证
7. 负责元器件本地化
要求:
1. 本科及以上学历,电子,机械等相关专业
2. 三年以上电子成品设计或制造经验
3. 熟悉Auto CAD,Gerber tool, UG者优先
4. 熟练的英语听说读写能力
Job Description
Review design packaging from customer, mainly include BOM ,assembly drawing, Gerber file and Schematic
Prepare BOM in SAP and manage ECN(Engineering change notice)
Perform failure analysis regarding customer claims and production failures if and when found necessary
Develop cost-effective, ergonomic, efficient and safe packing solution for the new products.
To be the technical window person with customer
To be the coordinator for NPI product validation
To be in charge of components localization
Requirement
Bachelor degree or above, major in Electronics, mechanical or relative
3+ years design or manufacture experience in electronic products
Be familiar with Auto CAD , Gerber tool. UG is preferred.
Fluent English in Listening, Speaking, Reading and Writing
公司介绍
我们的宗旨是为江苏及华东地区的企业提供企业管理咨询,信息咨询及人才的派遣服务。
我们的团队是一群具有10年以上资历的行业精英,他们来自企业的管理团队,在企业内部的管理、市场、销售、人力资源,财务、生产、质量、供应链等相关领域有着丰富的经验。凭借他们敏锐的眼光、对行业的专攻和丰富的经验,为现代企业的发展添砖加瓦。
我们的团队是一群具有10年以上资历的行业精英,他们来自企业的管理团队,在企业内部的管理、市场、销售、人力资源,财务、生产、质量、供应链等相关领域有着丰富的经验。凭借他们敏锐的眼光、对行业的专攻和丰富的经验,为现代企业的发展添砖加瓦。
联系方式
- 公司地址:南京
- 邮政编码:210002
- 联系人:Helen
- 传真:(025)
- 电话:(025)84452026