质量工程师
上美塑胶（南京）有限公司
- 公司规模：500-1000人
- 公司性质：外资(欧美)
- 公司行业：汽车
职位信息
- 发布日期：2013-01-15
- 工作地点：南京
- 招聘人数：1
- 工作经验：三年以上
- 学历要求：本科
- 语言要求：英语熟练
- 职位类别：质量管理/测试工程师(QA/QC工程师)
职位描述
职位描述/GENERAL JOB DESCRIPTION:
协调和执行一组员工的活动，制订质量控制规定和流程，借助完善的质量控制技术和质量系统要求，确保产品符合预定质量标准。
Coordinates and implements the activities for a group of employees, developing the controls that insure that the products satisfy the preset quality standards, using adequate control techniques and Quality System requirements.
责任与义务/DUTIES AND RESPONSIBILITIES:
监管材料检查工作，进行部门审计，生产审计，装配和产品包装。在需要时向客服和生产部门提供服务。开发改进活动和贯彻质量系统，从投入阶段就参加新产品的开发活动。遵守环境政策和环境管理系统相关指示。遵守工作场所安全和健康政策及有关指示。
Supervises material inspection activities, performs department audits, production audits, assembly, and product packing. Provides customer service, as well as to the production departments as needed. Develops improvement activities and implements quality systems, participates in the development of new products from the launch stage. Comply with the Environmental Policy and applicable Environmental Management Systems instructions. Comply with the Quality Policy and applicable Quality System instructions. Comply with the Workplace Safety and Health Policy and applicable instructions.
工作内容/ACTIVITIES:
- 协调材料检查的纪录和监控（收货、加工、完工）。
- Coordinates the recording and monitoring of the material inspections (receiving, process, final).
- 参与内部审计计划（对系统、产品及流程的审计）。
- Participates in the internal audits program (to systems, products and process).
- 按照工厂程序及指令支持和维护质量系统。
- Supports and maintains the quality system as defined in the plant procedures and instructions.
- 在员工和主管会议上解释报告。
- Explains the reports in Staff and supervisor’s meetings.
- 验核及复查新产品和现有产品的质量标准。
- Verifies and follows-up on the quality standards of new and current products.
- 支持解决问题的流程并开发保证质量的预防性和纠正措施。
- Supports the problem-solving process and develops preventive and corrective measures
that insure quality.
- 在需要时向技术人员和/或审计人员提供支持和监管。
- Provides support and supervision to technicians and/or auditors as needed.
- 对顾客的质量问题投诉（包括行动和结果）采取跟进行动，拜访中国和美国的客户。
- Follows-up on client complaints regarding quality problems including actions and results, visiting clients in China and the United States.
- 在与客户、供应商打交道时，若有必要，在总公司一级代表工厂。
- Represents the plant, as corporate level, with clients, suppliers, as needed.
- 准备和向客户介绍产品。
- Prepares and presents product submission to clients
- 为 Summit Componentes和客户评价销售代表或供应商提供的产品。
- Evaluates product submissions from salesmen or suppliers for Summit Componentes
and clients.
- 评价新产品和生产产品颜色。
- Evaluates New Product and Production Product color.
- 对报告的供应商违规情况及其改正行动跟进随访。
- Follows-up on non-compliances reported to our suppliers and their corrective actions.
- 对不同现有生产控制问题（生产控制、设置等）的跟进措施进行审计和监视。
- Audits and monitors the follow-up of the different existing Production controls
(P. Control, Set up, etc.).
-完成其他分配的职责。
-Performs other duties as assigned.
- ISO/TS 16949。
职责要求：
1、能够熟练的运用英语进行口头和书面表达。
2、至少1-2年参与Ford/GM项目开发经验。
3、熟悉GM/Ford的特殊要求（包括体系，产品，生产过程等）。
4、参与先期产品的开发，懂得APQP流程和要求。
5、愿意学习，并具有较强的学习能力。
6、良好的团队合作精神。
7、良好的沟通能力和抗压能力。
协调和执行一组员工的活动，制订质量控制规定和流程，借助完善的质量控制技术和质量系统要求，确保产品符合预定质量标准。
Coordinates and implements the activities for a group of employees, developing the controls that insure that the products satisfy the preset quality standards, using adequate control techniques and Quality System requirements.
责任与义务/DUTIES AND RESPONSIBILITIES:
监管材料检查工作，进行部门审计，生产审计，装配和产品包装。在需要时向客服和生产部门提供服务。开发改进活动和贯彻质量系统，从投入阶段就参加新产品的开发活动。遵守环境政策和环境管理系统相关指示。遵守工作场所安全和健康政策及有关指示。
Supervises material inspection activities, performs department audits, production audits, assembly, and product packing. Provides customer service, as well as to the production departments as needed. Develops improvement activities and implements quality systems, participates in the development of new products from the launch stage. Comply with the Environmental Policy and applicable Environmental Management Systems instructions. Comply with the Quality Policy and applicable Quality System instructions. Comply with the Workplace Safety and Health Policy and applicable instructions.
工作内容/ACTIVITIES:
- 协调材料检查的纪录和监控（收货、加工、完工）。
- Coordinates the recording and monitoring of the material inspections (receiving, process, final).
- 参与内部审计计划（对系统、产品及流程的审计）。
- Participates in the internal audits program (to systems, products and process).
- 按照工厂程序及指令支持和维护质量系统。
- Supports and maintains the quality system as defined in the plant procedures and instructions.
- 在员工和主管会议上解释报告。
- Explains the reports in Staff and supervisor’s meetings.
- 验核及复查新产品和现有产品的质量标准。
- Verifies and follows-up on the quality standards of new and current products.
- 支持解决问题的流程并开发保证质量的预防性和纠正措施。
- Supports the problem-solving process and develops preventive and corrective measures
that insure quality.
- 在需要时向技术人员和/或审计人员提供支持和监管。
- Provides support and supervision to technicians and/or auditors as needed.
- 对顾客的质量问题投诉（包括行动和结果）采取跟进行动，拜访中国和美国的客户。
- Follows-up on client complaints regarding quality problems including actions and results, visiting clients in China and the United States.
- 在与客户、供应商打交道时，若有必要，在总公司一级代表工厂。
- Represents the plant, as corporate level, with clients, suppliers, as needed.
- 准备和向客户介绍产品。
- Prepares and presents product submission to clients
- 为 Summit Componentes和客户评价销售代表或供应商提供的产品。
- Evaluates product submissions from salesmen or suppliers for Summit Componentes
and clients.
- 评价新产品和生产产品颜色。
- Evaluates New Product and Production Product color.
- 对报告的供应商违规情况及其改正行动跟进随访。
- Follows-up on non-compliances reported to our suppliers and their corrective actions.
- 对不同现有生产控制问题（生产控制、设置等）的跟进措施进行审计和监视。
- Audits and monitors the follow-up of the different existing Production controls
(P. Control, Set up, etc.).
-完成其他分配的职责。
-Performs other duties as assigned.
- ISO/TS 16949。
职责要求：
1、能够熟练的运用英语进行口头和书面表达。
2、至少1-2年参与Ford/GM项目开发经验。
3、熟悉GM/Ford的特殊要求（包括体系，产品，生产过程等）。
4、参与先期产品的开发，懂得APQP流程和要求。
5、愿意学习，并具有较强的学习能力。
6、良好的团队合作精神。
7、良好的沟通能力和抗压能力。
公司介绍
Summit Polymers Inc. is a Kalamazoo, Michigan based, multi-plant, automotive supplier of injection molded interior parts, which specializes in the engineering, manufacture and assembly of feature based a/c registers, consoles and trim panels. SPI has design and sales team, build up excellent symbiosis with many famous carmaker and automobile components supplier for example Ford, GM etc. The Nanjing Plant is established on June 2006, located in Jiangning Economic & Development Zone, and started production on February 2007, the company business performance is good, and being in the period of vigorously development, the existing staff are more than 500 people.
上美塑胶是一家总部位于美国密歇根州的汽车零部件供应商，主营汽车塑料内饰系统，致力于设计、工程、制造和组装各种特色类产品，上美塑胶有自己的设计团队和销售团队，与福特、通用等多家著名的汽车制造商以及汽车零配件供应商都有良好的合作关系。上美塑胶（南京）有限公司成立于2006年6月，坐落于风景秀丽的江宁经济开发区，公司在2007年2月正式投产，公司运营业绩良好，正处于蓬勃发展之际，现有员工500余人。
Through the joint efforts of all the staff, the company achieved good performance, and at the same time, won the acceptance of the industry：
In July 2008, the company was successfully certified by BSI the ISO14001 Environmental Management System and TS16949 Quality System.
In February 2009, the company was awarded “Integrity” by Nanjing Labor and Social Security Bureau.
In December 2010, the company successfully passed the “clean production” audit from Jiangsu Province "Clean Production Promote Committee".
In December 2010, the company was awarded “Green Enterprises".
In 2011， the Company was awarded Ford "Supplier Quality Silver Award"
In 2012, 2013, 2014, the company was awarded Ford "Supplier Quality Gold Award" becoming the only one supplier that won that honor for consecutive four years.
The company values employees training and it provides a safety and environmental work environment.
通过所有员工的同心协力，公司在实现良好业绩的同时也赢得了行业和社会的认可：
2008年7月公司顺利通过英标BSI 的ISO14001环境管理体系认证，和TS16949汽车行业质量体系认证。
2009年2月获得南京市劳动与社会保障局颁发的“诚信单位”殊荣
2010年12顺利通过江苏省“清洁生产促进委员会”的“清洁生产”审核
2010年12荣获江宁区首批“绿色等级企业”称号
2011年3月获得福特“优质供应商银奖”
2012年，2013年，2014年连续三年获得福特“优质供应商金奖”，成为***一家连续四年荣获福特优质供应商荣誉的公司
公司注重人才的内部开发与培养，为员工提供安全环保的工作环境，致力于为个人发展搭建舞台的同时，实现企业效益与社会效益的和谐发展。
“Who We Are”（Plant Culture）
Our Objectives:
1. Provide customer satisfaction to be readily recognized as their “Preferred Supplier of Choice”.
2. Protect the customer from “Exposures”.
3. Maintain Safety and Housekeeping Excellence.
4. Attack and Reduce Wastes.
5. Control Costs.
我们的目标：
1、满足客户的需求，作客户易于接受的首选的供应商。
2、保护客户隐私。
3、安全生产，优质管理。
4、降低损耗。
5、控制成本。
Company Benefits:
1. The company offers free working meals with friut and meal.
2. The company pays 5 kinds of insurance and housing fund for employees on time.
3. You can enjoy high temperature allowance, marriage allowance, childbirth allowance, holiday allowance, etc.
4. The company offers the thirteen month salary for the employees who meet the company requirements
5. You will have signed their labor contract can enjoy 7-20 days’ paid vacation every year.
6. The company provides shuttle bus to work （applies to Nanjing plant only)
7. The employees who work in the shop floor enjoy the Quarterly Bonus/Traffic Allowance/Attendance Bonus/Outstanding Employee Bonus.
公司福利：
1、公司为员工提供免费的营养工作餐。
2、公司按时足额为员工缴纳五项社会保险和住房公积金。
3、员工将享受高温、婚庆、生育、生日、节假日等各种补贴。
4、对于符合要求的员工，将享受年底第十三薪待遇
5、员工将享受一年7-20天的带薪年假。
6、提供班车接送办公室员工上下班（只适用于南京工厂员工）
7、产线员工享受季度奖金、交通补贴、绩效奖金、全勤奖、优秀员工奖。
Why Summit:
1. The register sales occupy 35% of the market share
2. High quality products
3. Continuously win the special award of our customer
4. Top ranking Lean system
5. Highly automatic production
6. Adequate training
7. Internal promotion channel
8. Good work atmosphere
为什么选择上美塑胶：
1、 出风口销量占据着美国35%的市场份额
2、 高质量的产品
3、 持续赢得客户的殊荣
4、 一流的精益生产系统
5、 高度自动化的生产
6、 充分的培训
7、 内部晋升通道
8、 其乐融融的工作氛围
有意加入上美大家庭者，请及时将您详细的中英文简历、1张1寸免冠照片、身份证复印件、学历证明复印件及相关资质证书复印件e-mail、传真或寄往本公司（采用邮寄方式者，请在信封的封面和简历中注明应聘职位）。未接面试通知者，个人资料将由我们妥善保管并不再退回，以便有合适的机会及时通知您。
公司地址：
江苏省南京市江宁经济开发区苏源大道68号南京出口加工区（南区）邮编：211100
面试乘车路线：
地铁一号线在安德门站下车，转乘公交清安线至出口加工区
地铁一号南延线在竹山路站下车，转乘公交区16路至出口加工区
南京南站乘坐192路公交至出口加工区下
面试时，请带好笔、身份证、毕业证书的原件！
深圳办公室地址：深圳市宝安区福永桥和路思源工业二区4楼，518103
上美塑胶是一家总部位于美国密歇根州的汽车零部件供应商，主营汽车塑料内饰系统，致力于设计、工程、制造和组装各种特色类产品，上美塑胶有自己的设计团队和销售团队，与福特、通用等多家著名的汽车制造商以及汽车零配件供应商都有良好的合作关系。上美塑胶（南京）有限公司成立于2006年6月，坐落于风景秀丽的江宁经济开发区，公司在2007年2月正式投产，公司运营业绩良好，正处于蓬勃发展之际，现有员工500余人。
Through the joint efforts of all the staff, the company achieved good performance, and at the same time, won the acceptance of the industry：
In July 2008, the company was successfully certified by BSI the ISO14001 Environmental Management System and TS16949 Quality System.
In February 2009, the company was awarded “Integrity” by Nanjing Labor and Social Security Bureau.
In December 2010, the company successfully passed the “clean production” audit from Jiangsu Province "Clean Production Promote Committee".
In December 2010, the company was awarded “Green Enterprises".
In 2011， the Company was awarded Ford "Supplier Quality Silver Award"
In 2012, 2013, 2014, the company was awarded Ford "Supplier Quality Gold Award" becoming the only one supplier that won that honor for consecutive four years.
The company values employees training and it provides a safety and environmental work environment.
通过所有员工的同心协力，公司在实现良好业绩的同时也赢得了行业和社会的认可：
2008年7月公司顺利通过英标BSI 的ISO14001环境管理体系认证，和TS16949汽车行业质量体系认证。
2009年2月获得南京市劳动与社会保障局颁发的“诚信单位”殊荣
2010年12顺利通过江苏省“清洁生产促进委员会”的“清洁生产”审核
2010年12荣获江宁区首批“绿色等级企业”称号
2011年3月获得福特“优质供应商银奖”
2012年，2013年，2014年连续三年获得福特“优质供应商金奖”，成为***一家连续四年荣获福特优质供应商荣誉的公司
公司注重人才的内部开发与培养，为员工提供安全环保的工作环境，致力于为个人发展搭建舞台的同时，实现企业效益与社会效益的和谐发展。
“Who We Are”（Plant Culture）
Our Objectives:
1. Provide customer satisfaction to be readily recognized as their “Preferred Supplier of Choice”.
2. Protect the customer from “Exposures”.
3. Maintain Safety and Housekeeping Excellence.
4. Attack and Reduce Wastes.
5. Control Costs.
我们的目标：
1、满足客户的需求，作客户易于接受的首选的供应商。
2、保护客户隐私。
3、安全生产，优质管理。
4、降低损耗。
5、控制成本。
Company Benefits:
1. The company offers free working meals with friut and meal.
2. The company pays 5 kinds of insurance and housing fund for employees on time.
3. You can enjoy high temperature allowance, marriage allowance, childbirth allowance, holiday allowance, etc.
4. The company offers the thirteen month salary for the employees who meet the company requirements
5. You will have signed their labor contract can enjoy 7-20 days’ paid vacation every year.
6. The company provides shuttle bus to work （applies to Nanjing plant only)
7. The employees who work in the shop floor enjoy the Quarterly Bonus/Traffic Allowance/Attendance Bonus/Outstanding Employee Bonus.
公司福利：
1、公司为员工提供免费的营养工作餐。
2、公司按时足额为员工缴纳五项社会保险和住房公积金。
3、员工将享受高温、婚庆、生育、生日、节假日等各种补贴。
4、对于符合要求的员工，将享受年底第十三薪待遇
5、员工将享受一年7-20天的带薪年假。
6、提供班车接送办公室员工上下班（只适用于南京工厂员工）
7、产线员工享受季度奖金、交通补贴、绩效奖金、全勤奖、优秀员工奖。
Why Summit:
1. The register sales occupy 35% of the market share
2. High quality products
3. Continuously win the special award of our customer
4. Top ranking Lean system
5. Highly automatic production
6. Adequate training
7. Internal promotion channel
8. Good work atmosphere
为什么选择上美塑胶：
1、 出风口销量占据着美国35%的市场份额
2、 高质量的产品
3、 持续赢得客户的殊荣
4、 一流的精益生产系统
5、 高度自动化的生产
6、 充分的培训
7、 内部晋升通道
8、 其乐融融的工作氛围
有意加入上美大家庭者，请及时将您详细的中英文简历、1张1寸免冠照片、身份证复印件、学历证明复印件及相关资质证书复印件e-mail、传真或寄往本公司（采用邮寄方式者，请在信封的封面和简历中注明应聘职位）。未接面试通知者，个人资料将由我们妥善保管并不再退回，以便有合适的机会及时通知您。
公司地址：
江苏省南京市江宁经济开发区苏源大道68号南京出口加工区（南区）邮编：211100
面试乘车路线：
地铁一号线在安德门站下车，转乘公交清安线至出口加工区
地铁一号南延线在竹山路站下车，转乘公交区16路至出口加工区
南京南站乘坐192路公交至出口加工区下
面试时，请带好笔、身份证、毕业证书的原件！
深圳办公室地址：深圳市宝安区福永桥和路思源工业二区4楼，518103
联系方式
- 公司地址：br江苏省南京市江宁经济开发区苏源大道68号南京出口加工区（南区）邮编：211100
- 电话：13851431403