南京招聘

主要职责/Major Responsibilities：
-制定、调整、实施所负责领域的物流管理与操作方案。Working out ,adjustment and implementation the logistics management and operation in charged .
-确保所负责领域物流操作的交付，质量和成本指标的完成。Securing the completion of delivery, quality and cost target set for logistics operation in charged.
-持续评价并改进所负责领域物流操作与管理的实施效果。Appraisal the implementation effect of the plan of logistics.
-固废管理（轮岗）So lid waste management (rotating)

Principal Duties/主要工作
物流操作管理Logistics operation management
-编制所负责领域物流管理方案与操作计划. Drafting of management model and operation plan for logistics area in charged
-所负责领域物流量的调查与汇总。Survey and consolidation of logistics volume for area in charged.
-控制和调整并持续改进所负责领域物流管理与操作。Controlling and adjusting and constantly improving the logistics management and operation for area in charged
-起草编制所负责领域物流预算方案。Drafting the logistics budget for area in charged.
-所负责领域第三方物流公司物流操作与管理的日常管理及绩效评估3PL daily operation management and performance assessment for area in charged.
-所负责领域物流操作交付期, 质量及物流成本的持续改善。Constantly improving the delivery, quality and costs of logistics operation for area in charged.
-分析所负责领域物流成本。Analyze of logistics costs for area in charged.

固废管理（轮岗）Solid waste management (rotating)
- 负责公司范围内固废管理的操作与管理，督促并落实公司及固废承包商遵循与固废相关的环保法律和规定。具体包括：Responsible for the operation and management of CFME solid waste management, supervising and implementing the observation of solid waste related environment laws and regulations by CFME and contractors. Details are as below:
(1) 根据国家政策要求，制定公司固废管理制度和流程；Formulating the solid waste management system and flowchart in accordance with relevant laws and regulations;
(2) 制定并负责实施公司固废处理工作制度和流程；Formulating and implementing the system and flowchart of solide waste disposing system;
(3) 对公司各部门固废工作进行管理和考核。Management and assessment of solid waste management performance of each department within the company.
(4) 对固废管理供应商实施管理和考核； Managing and assessing the performance of solid waste service provider;
(5) 分析和控制公司固废管理和处置费用。Solid waste related expense analysis and controlling.

任职要求/ Qualifications：
n 必须具备的基本录用条件 Must-have qualifications
v 大专及以上The college specialty above
v 基本的英语交谈和书写能力Basic conversation and writing ability in English.
v 熟练运用办公软件 Experienced in using office software
v 能适应经常出差Can often accommodate for evection.
v 具有良好的人际关系，乐观向上的性格，组织协调能力，团队合作精神Mature interpersonal skills, pleasant personality, organizing ability, coordinating ability, team work spirit
v 熟悉国际贸易和通关知识。Quite familiar with International Trade and passing through customs.
v 熟悉仓储运输知识。Quite familiar with storage and transport.
v 具有进行物流项目成本分析能力。Ability of the analyze of logistics project cost.
v 熟悉物流过程中安全管理。Quite familiar with the safety management during the process of logistics.
v 了解物流行业的法律法规。Grasp the laws and regulations of the Logistics trade.

n 优先录取的录用条件 Preferred qualifications
v 2年以上汽车行业生产管理和供应链管理经验More than 2 years experience of production management and supply-chain management in Automobile area.

  长安福特马自达发动机有限公司由重庆长安汽车股份有限公司、福特汽车公司和马自达汽车株式会社共同合资兴建。公司注册资本17270万美元，其中重庆长安汽车股份有限公司占股份的50%，福特汽车公司与马自达汽车株式会社各占股份的25%。
Changan Ford Mazda Engine Co., Ltd. was jointly invested by Changan Automobile Co., Ltd., Ford Motor Company, and Mazda Motor Corporation, total registered capital reaching USD172.7 million, in which Changan Automobile Co., Ltd. holds 50% of the shares, Ford Motor Company and Mazda Motor Corporation respectively hold 25% each.
  公司于2005年9月26日正式成立，于2007年4月26日完成生产线建设并投入批量生产。公司主要产品包括BZ和NEW I4两大系列发动机，排量覆盖1.3L至2.3L。2010年，公司发动机产销量分别达213053台及212232台。2011年底，公司产品谱系新增Sigma系列发动机，产能跃升至43万台/年。目前公司在产的发动机均采用了轻质铝合金气缸体和气缸盖、注塑进气歧管、VCT机构（可变凸轮正时）、VIS机构（可变进气系统）、TSCV机构（进气漩涡控制阀）、MFI结构（多点电控燃料喷射）以及平衡轴机构等先进技术，以优化动力性能、燃料经济性、排放和NVH（噪音、振动、平顺性）性能，集成了发动机设计的各项新成果。
Changan Ford Mazda Engine Co., Ltd. was established on September 26, 2005, official mass production was launched on April 26, 2007. The main products of the company are BZ and New I4 – two series of engines, covering displacement from 1.3L to 2.3L. In 2010, company produced engine 213,053 units and sold 212,232 units separately. At the end of 2011, the company's products will add Sigma new series of engines. Until then, the company is equipped with an overall manufacturing capacity of 430 thousand vehicle engines a year. Advanced technologies such as light cylinder block and cylinder head made of aluminum alloy, plastic-injection intake manifold, VCT mechanism (Variable Cam Timing), VIS mechanism (Variable Intake System), TSCV mechanism (Tumble Swirl Control Valve), MFI mechanism (Multi-port Fuel Injection), and balance shaft mechanism etc. are adopted for the products. Various new achievements in the field of engine design are also embodied through optimization of dynamic performance, fuel economy, emission, and NVH (Noise, Vibration, Harshness) etc.
  公司注重科学管理，践行社会责任，先后通过了ISO9001、TS16949质量体系认证，以及ISO14001环境体系认证。公司以“雕琢精品动力、创造和谐生活”为使命，在全体员工的共同努力下，向打造“技术领先、质量最佳、成本最优”的世界一流发动机基地”的愿景不断迈进。
Company attaches importance to scientific management and take a role in fulfilling social obligations. It has passed the ISO9001, TS16949 quality system certification and ISO14001 environment system certification already. Taking mission of "Excellent Power Harmonious Life", company will constantly moving towards to the vision of "Be the world first-class engine base with leading technology, best quality and optimal cost" with the joint efforts of all staff.