项目工程师（日语）
南京苏合新能源科技有限公司
- 公司性质：民营
- 公司行业：新能源 新能源
职位信息
- 发布日期：2024-02-28
- 工作地点：南京
- 工作经验：无需经验
- 学历要求：本科
- 职位月薪：1.5-2万·13薪
- 职位类别：日语翻译 汽车
职位描述
岗位设置的目的/GENERAL PURPOSE OF THE POSITION:
在产品和模具设计符合公司标准的情况下，为新产品的开发提供技术支持，保证新项目的成功引入。
Technically support the new product development under the circumstance that the product and mold are designed as SPI standard to ensure the new program can be brought in successfully.
工作职责/JOB RESPONSIBILITY:
将客户对产品设计的要求传递给产品设计师，在项目设计阶段与产品设计师合作确保设计符合标准，同时利用Kaizen做出改善。
Delivery the customer’s design request to product designer, work with product designer at the program design stage to make sure the design meet with the standard and make improvement by Kaizen.
制定模具布局图，要求供应商按照要求设计模具。模具设计完成后，配合模具工程师进行审核，并做出相应的变更以满足生产的可行性。
Creat Tool Layout and request supplier to design Molds based on Tool Layout . After finishing Mold design, attend Mold Design Review with TE and make design change to make sure it is productive.
参加模厂内的试模，确认模具结构和工艺设定，保证产品符合尺寸和外观的需求。
Participate in the mold trial run at mold Factory. Comfirm the mold structure and process setting, make sure the product meet the dimension and the appearance requirement.
组装产品，验证产品是否达到要求。
Assembly the products to test if they can meet the requirement.
向实验室提交测试需求，测试产品各项功能，对于不能达到要求的产品做出持续改善。
Submit the testing request to the Lab. Work with Lab for parts testing and improve the product to meet the requirement.
为工厂的PPAP提供数据支持。
Data support the PPAP.
协助MTL验证组装工装是否满足生产要求，提出改善建议，同时协调相关方面做出改善。
Work with MTL to verify fixture trial run and continuously improve the part to make sure fixture works.
配合产品开发团队完成客户各时间节点的要求。
Cooperate with PD team to complete customer requirements according to program milestone .
建立和更新产品的设计标准。
Creat and update the product’s design standard.
协助工厂处理量产后发生的相关问题。
Assist plant with continuous improvement for any issue.
遵守环境方针以及质量和环境管理系统的相关要求。遵守工作场所安全和健康政策及相关指示。
Complies with the environmental policy and applicable quality and environmental management systems instructions. Comply with the Workplace Safety and Health Policy and applicable instructions.
从事其他指定的活动。
Performs other activities as assigned.
应具备的胜任力/COMPETENCE REQUIREMENTS:
Ⅰ.知识和技能/KNOWLEDGE AND SKILL
出色的书面和口头沟通技巧。
Excellent written and verbal communication.
决策能力。
Decision making abilities.
能用日语准确地沟通工作内容。
Be able to accurately communicate job content in Japanese.
具备注塑模具作业知识。
Knowledge of injection molding operations.
具备塑胶件装配知识
Knowledge of plastic parts assembly methods.
具备塑胶件表面处理知识
Knowledge of plastic parts decoration methods.
在产品和模具设计符合公司标准的情况下，为新产品的开发提供技术支持，保证新项目的成功引入。
Technically support the new product development under the circumstance that the product and mold are designed as SPI standard to ensure the new program can be brought in successfully.
工作职责/JOB RESPONSIBILITY:
将客户对产品设计的要求传递给产品设计师，在项目设计阶段与产品设计师合作确保设计符合标准，同时利用Kaizen做出改善。
Delivery the customer’s design request to product designer, work with product designer at the program design stage to make sure the design meet with the standard and make improvement by Kaizen.
制定模具布局图，要求供应商按照要求设计模具。模具设计完成后，配合模具工程师进行审核，并做出相应的变更以满足生产的可行性。
Creat Tool Layout and request supplier to design Molds based on Tool Layout . After finishing Mold design, attend Mold Design Review with TE and make design change to make sure it is productive.
参加模厂内的试模，确认模具结构和工艺设定，保证产品符合尺寸和外观的需求。
Participate in the mold trial run at mold Factory. Comfirm the mold structure and process setting, make sure the product meet the dimension and the appearance requirement.
组装产品，验证产品是否达到要求。
Assembly the products to test if they can meet the requirement.
向实验室提交测试需求，测试产品各项功能，对于不能达到要求的产品做出持续改善。
Submit the testing request to the Lab. Work with Lab for parts testing and improve the product to meet the requirement.
为工厂的PPAP提供数据支持。
Data support the PPAP.
协助MTL验证组装工装是否满足生产要求，提出改善建议，同时协调相关方面做出改善。
Work with MTL to verify fixture trial run and continuously improve the part to make sure fixture works.
配合产品开发团队完成客户各时间节点的要求。
Cooperate with PD team to complete customer requirements according to program milestone .
建立和更新产品的设计标准。
Creat and update the product’s design standard.
协助工厂处理量产后发生的相关问题。
Assist plant with continuous improvement for any issue.
遵守环境方针以及质量和环境管理系统的相关要求。遵守工作场所安全和健康政策及相关指示。
Complies with the environmental policy and applicable quality and environmental management systems instructions. Comply with the Workplace Safety and Health Policy and applicable instructions.
从事其他指定的活动。
Performs other activities as assigned.
应具备的胜任力/COMPETENCE REQUIREMENTS:
Ⅰ.知识和技能/KNOWLEDGE AND SKILL
出色的书面和口头沟通技巧。
Excellent written and verbal communication.
决策能力。
Decision making abilities.
能用日语准确地沟通工作内容。
Be able to accurately communicate job content in Japanese.
具备注塑模具作业知识。
Knowledge of injection molding operations.
具备塑胶件装配知识
Knowledge of plastic parts assembly methods.
具备塑胶件表面处理知识
Knowledge of plastic parts decoration methods.
公司介绍
南京苏合新能源科技有限公司诚聘
联系方式
- 联系人：Vincent
- 电话：15651614939