杭州招聘

Main duties and Responsibilities:
1.Ensure the completion of daily inspection tasks.
确保日常检验任务的完成
？Ensure that all finished products delivered to QC are identical with drawing specification, company Quality Policy and Quality objective.
确保所有送检的成品与图纸规格、公司质量方针和质量目标一致。
？Perform inspection according to inspection procedure and inspection instruction.
根据相关的检验程序和检验规范执行检验任务。
？Record all inspection data according to inspection procedure and make sure the traceability and accuracy of inspection data.
根据检验程序的要求记录所有的检验数据并对数据的可追溯性和精准性负责。
？inspection information to ERP system correctly in time.
准确及时地输入检验信息到ERP系统。
？Monitor unqualified parts and process them according to nonconformance procedure and relative work flow. Report to QA manager.
管控不合格品，根据不合格品程序和相关工作流程妥善处理不合格品，汇报给质量经理。
？Follow up corrective action for unqualified parts and verify effectiveness of the action.
跟踪不合格品的纠正措施并验证其有效性。
2.Daily Management & Maintenance of Test Equipments
测试设备的使用管理和日常维护
？Operate test equipments correctly according to Test Equipment Instruction.
根据测试设备使用说明正确操作。
？Daily spot check of test equipments to ensure the function before and after using.
对测试设备进行日常的点检，确保使用前后其功能正常。
？To be responsible for maintenance of test equipments and report abnormal problems to QA manager.
负责测试设备的维修和维护，向质量经理汇报异常情况。
？Assist Quality Engineer on test equipments’ calibration.
协助质量工程师完成测试设备的计量和校准工作。
3.Others 其他
？Retention and trace of Quality documents and records.
质量文件和记录的保存和追溯。
？Drawing management. 图纸管理
？Other tasks from Quality Manager. 其他的工作任务

Job Requirement:
？Understand English drawings.
能够阅读英文图纸。
？Be familiar with general test equipments and tools, such as caliper, height gauge, etc.
熟悉通常的检测设备和工具，如：游标卡尺、高度尺等。
？At least 2 years working experience in FQC or related area.
2年以上热流道终检或其他相关工作经验
？Conscientious, has strong sense of quality and customer orientation
认真负责，具有强烈的质量意识，始终坚持满足客户需求的原则。
？Team work orientation and self-motivated, have good communication and coordination skills.
自信积极，有良好的团队合作精神和沟通协调能力。
？Cannot be color blinded.
非色盲人士

MISSION

The INglass-HRSFlow mission comprises a non-stop search for innovative solutions to simplify production processes, reduce costs and improve the quality of the final molded part. INglass-HRSFlow takes an innovative approach to the customer, which involves not only preliminary product analysis but also a careful selection of the most appropriate technology to use from the very initial project stages. This enables the customer to:

 Cut down cycle time.
 Reduce production scrap, defects and wastage.

Benefits that allow cost reductions to be made throughout the entire molding process.

PROFILE

 The INglass-HRSFlow group, based in San Polo di Piave, was founded as Incos in 1987, with main activities comprising the design and manufacture of molds for the plastics industry
 1991 witnessed INglass-HRSFlow focusing its attention on rotating multicolour and multicomponent molds for automotive lighting.
 2001 gave birth to the HRSFlow division targeted exclusively on the planning, design, and implementation of hot runner systems for plastic injection molding.
 2004 setting up of the INglass division dedicated to injection compression molding technology and the production of large transparent polycarbonate surfaces as an alternative to glass products for the Automotive industry (Plastic Glazing).
 2004 the Technological Automation Unit was set up in order to deal with the research, development and production of control units to allow operators total control of the molding process.
 Since 2007, INglass-HRSFlow has been able to offer customers a service aimed at optimising mold cooling time by means of mold cooling analysis and, if required, the production of tailor-made inserts using SLM - Selective Laser Melting (laser-melted metal powder) technology.
 2009 opening of a new production plant for hot runner systems in China - Hangzhou to serve the high demanding Asian markets like Japan, Korea and Taiwan,
In the same year, gave birth to the HRSmultitech line, that offers the perfect solution for high- performance systems catering to large production volumes involving reduced part weight or thickness and technically-advanced materials.
 2012 opening of a new branch in India

INglass-HRSFlow is currently in the enviable position of being not only the simple supplier of molds and hot runner systems but also a real business partner capable of helping customers take critical decisions along the entire production chain and, consequently, putting them in the position to face the challenges of an ever-changing market.

宗旨

英格斯-好塑（INglass-HRSflow）不断探索创新性的解决方案，致力于简化生产流程，降低成本，提高最终成型产品质量。英格斯-好塑为客户提供全面的创新服务，不仅包括最初产品分析，并且在项目初始阶段仔细挑选最适合客户的应用技术。

这能帮助客户：
缩短生产周期
减少生产废弃、缺陷及耗损

这些益处贯穿整个模具成型流程，帮助客户降低成本。

简介

英格斯-好塑总部位于意大利San Polo di Piave，创建于1987年，成立之初名为Incos，主要为塑料行业设计及生产模具。
1991年，英格斯-好塑开始致力于生产用于汽车照明（前后车灯）的旋转式多色多组件模具。
2001年，成立好塑（HRSflow）分部，专门设计并生产用于塑料注塑成型的热流道系统。
2004年，成立英格斯（INglass）分部，专注于注射压缩成型技术，生产高透明度的PC表面（聚碳酸酯表面），为汽车工业的玻璃制品提供另一种选择（Plastic Glazing）。
2004年，成立技术自动化部门，负责控制器的研发生产，帮助工作人员全程管理成型过程。
2007年，英格斯-好塑可以通过模具冷却分析为客户提供模具冷却优化服务，并且可根据客户要求，为客户提供采用SLM技术的定制镶件。（Selective Laser Melting Technology：选择性激光熔融技术，激光熔融金属粉末）
2009年，在中国杭州建立新的热流道系统生产工厂，为亚洲市场提供高质高效服务，涵盖日本、韩国、中国台湾、马来西亚等。
同年推出的HRS Multitech多腔系列，为要求能够大批量生产、减少塑件重量或壁厚、适用高技术材料的高性能系统，提供了完美的解决方案。
2012年，成立印度分公司。

英格斯-好塑的多重角色使其处在一个令人羡慕的位置上。它不止是单一的模具和热流道系统供应商，更是客户的理想合作伙伴，能够在生产链全程帮助客户作出关键性决策。正因如此，英格斯-好塑从而才能够面对不断变化的市场所带来的挑战。

更多信息敬请访问英格斯及好塑网站
http://www.inglass.it
**********************