Quality Engineer 质量工程师
佛吉亚（广州）汽车部件系统有限公司东莞分公司
- 公司性质：外资(欧美)
- 公司行业：汽车及零配件
职位信息
- 发布日期：2014-07-25
- 工作地点：东莞
- 招聘人数：1
- 工作经验：二年以上
- 学历要求：本科
- 语言要求：英语良好
- 职位月薪：面议
- 职位类别：质量管理/测试工程师(QA/QC工程师)
职位描述
工作目的Main Purpose of the job:
客户质量，生产质量和佛吉亚QSE推广
Be in charge of Customer Quality, Production Quality and deploying QSE in FES
3524 0877-51 140 4784 2050 36
主要工作Main missions:
1、组织Organization
①直接向质量经理报告 Rreport to Quality Manager
②管理客户质量跟线员 Manage Customer Resident
2、客户质量信息协调处理及管理实验室工作Manage customer information & Lab
①收集客户质量信息（客户下达的指标、年度/月度绩效结果等），及时传递给直属经理。Collect quality information(customer target，performance assessment monthly and annual)from the customer, and transfer to line manager
②对在客户处的不良和扣分进行确认Judge the non-conformation and Penalty treatment at customers’ site
③对客户发出的不良反应，采取即时围堵政策，并通过UAP QRQC，制定纠正预防措施，验证结果，并向客户反馈。Take containment vs the customer complain immediately, and analysis the cause by UAP QRQC, take preventive/corrective action, to validate the result, and return the feedback to the customer.
④确认/分析客户处报废品、售后退回品，组织相关职能功能采取纠正预防措施。Judge and analysis the Scraps and warranty returns from the customers，organize the relevant department to take preventive/corrective action.
⑤定期进行客户满意度调查/分析，组织对客户不满意项采取措施，并回访客户对改进措施的反应Investigate and analysis the customer satisfaction sense, organize to take action vs non-satisfaction items, and consult the reply to the actions from the customer
⑥参与过程流程图、失效模式分析、控制计划的编制评审，负责产品的试验指导书。Participate to the PFC，PFEMA，Control Plan, Products Operation Instruction creation and review. In Charge of creation for Products testing instruction.
⑦建立实验室管理体系，实施产品检验和试验,包括CCC试验的组织协调Establish the Laboratory system, inspect and test the products including CCC test at country lab
⑧建立计量管理体系，实施计量器具的检定、校准Establish the metrology system, examine/calibrate the gauges and measure equipment
⑨实施MSA, 确保测量系统的适用性、有效性Actualize MSA to ensure the measurement system applicability and validity
⑩实施产品审核，并跟踪通报趋势Actualize the product audit and follow up and open the trend
?跟线人员、客户质量技术员和实验员的人员管理Manage the personnel of residents, customer technicians and lab assistant.
3、佛吉亚卓越体系中QSE的拓展 Deploy QSE in FES
4、负责集团总部需要的质量报表 Be in charge of Quality Report to Division, PG or Group
5、生产过程质量的管理和控制 Manage and Control Production Quality
①处理不合格品，包括评审，分析，纠正和改进Treatment of non conformity parts: review, analysis, correction and improvements.
②返工品及废品的判定Rework and scrap managements.
③生产线质量控制，最终产品控制，过程巡回控制，需要时提出质量警告。Production quality control on line, final control, patrolling control, makes quality alarm when necessary.
④参与每天的红区产品评价，对供方问题进行处理.Join the team to judge the non-conformance parts, if the issue belong to supplier, follow the procedure to deal.
⑤生产线质量控制，最终产品控制，过程巡回控制，需要时提出质量警告。Production quality control on line, final control, patrolling control, makes quality alarm when necessary.
⑥产品质量保障:过程质量分析、产品审核。Quality assurance: analysis of process quality and audit of product.
⑦产品试验和计量：产品定期试验、检具和量具的定期检定。Lab test and metrology: regular lab test regular calibration of checking tool and gauge.
⑧更新控制计划及其它质量标准Update the control plan and other quality standards.
⑨协助生产部门对质量墙的管理Support on management of quality wall
主要工作
1、健康、安全和环境，工作条件
确保完全遵守HSE规章制度
2、团队合作
①确保与直属经理和内部顾客沟通的透明性和及时性
②参与到管理同事中间，以改善UAP绩效
③报告进货控制的成绩，成功点，问题点及开始的行动
附加或特殊工作任务
完成直属主管交给的临时紧急任务
任职资格：
1、理工科专业
2、英语可以沟通
3、3年以上工作经验者优先
4、有汽车行业工作经验者优先
客户质量，生产质量和佛吉亚QSE推广
Be in charge of Customer Quality, Production Quality and deploying QSE in FES
3524 0877-51 140 4784 2050 36
主要工作Main missions:
1、组织Organization
①直接向质量经理报告 Rreport to Quality Manager
②管理客户质量跟线员 Manage Customer Resident
2、客户质量信息协调处理及管理实验室工作Manage customer information & Lab
①收集客户质量信息（客户下达的指标、年度/月度绩效结果等），及时传递给直属经理。Collect quality information(customer target，performance assessment monthly and annual)from the customer, and transfer to line manager
②对在客户处的不良和扣分进行确认Judge the non-conformation and Penalty treatment at customers’ site
③对客户发出的不良反应，采取即时围堵政策，并通过UAP QRQC，制定纠正预防措施，验证结果，并向客户反馈。Take containment vs the customer complain immediately, and analysis the cause by UAP QRQC, take preventive/corrective action, to validate the result, and return the feedback to the customer.
④确认/分析客户处报废品、售后退回品，组织相关职能功能采取纠正预防措施。Judge and analysis the Scraps and warranty returns from the customers，organize the relevant department to take preventive/corrective action.
⑤定期进行客户满意度调查/分析，组织对客户不满意项采取措施，并回访客户对改进措施的反应Investigate and analysis the customer satisfaction sense, organize to take action vs non-satisfaction items, and consult the reply to the actions from the customer
⑥参与过程流程图、失效模式分析、控制计划的编制评审，负责产品的试验指导书。Participate to the PFC，PFEMA，Control Plan, Products Operation Instruction creation and review. In Charge of creation for Products testing instruction.
⑦建立实验室管理体系，实施产品检验和试验,包括CCC试验的组织协调Establish the Laboratory system, inspect and test the products including CCC test at country lab
⑧建立计量管理体系，实施计量器具的检定、校准Establish the metrology system, examine/calibrate the gauges and measure equipment
⑨实施MSA, 确保测量系统的适用性、有效性Actualize MSA to ensure the measurement system applicability and validity
⑩实施产品审核，并跟踪通报趋势Actualize the product audit and follow up and open the trend
?跟线人员、客户质量技术员和实验员的人员管理Manage the personnel of residents, customer technicians and lab assistant.
3、佛吉亚卓越体系中QSE的拓展 Deploy QSE in FES
4、负责集团总部需要的质量报表 Be in charge of Quality Report to Division, PG or Group
5、生产过程质量的管理和控制 Manage and Control Production Quality
①处理不合格品，包括评审，分析，纠正和改进Treatment of non conformity parts: review, analysis, correction and improvements.
②返工品及废品的判定Rework and scrap managements.
③生产线质量控制，最终产品控制，过程巡回控制，需要时提出质量警告。Production quality control on line, final control, patrolling control, makes quality alarm when necessary.
④参与每天的红区产品评价，对供方问题进行处理.Join the team to judge the non-conformance parts, if the issue belong to supplier, follow the procedure to deal.
⑤生产线质量控制，最终产品控制，过程巡回控制，需要时提出质量警告。Production quality control on line, final control, patrolling control, makes quality alarm when necessary.
⑥产品质量保障:过程质量分析、产品审核。Quality assurance: analysis of process quality and audit of product.
⑦产品试验和计量：产品定期试验、检具和量具的定期检定。Lab test and metrology: regular lab test regular calibration of checking tool and gauge.
⑧更新控制计划及其它质量标准Update the control plan and other quality standards.
⑨协助生产部门对质量墙的管理Support on management of quality wall
主要工作
1、健康、安全和环境，工作条件
确保完全遵守HSE规章制度
2、团队合作
①确保与直属经理和内部顾客沟通的透明性和及时性
②参与到管理同事中间，以改善UAP绩效
③报告进货控制的成绩，成功点，问题点及开始的行动
附加或特殊工作任务
完成直属主管交给的临时紧急任务
任职资格：
1、理工科专业
2、英语可以沟通
3、3年以上工作经验者优先
4、有汽车行业工作经验者优先
公司介绍
佛吉亚（广州）汽车部件系统有限公司东莞分公司诚聘