东莞招聘

  

1. To work with Signal integrity engineer or mechanical engineer to transfer the electromagnetic 3D model into PCB model that severs for local customer or create PCB model into ODB++ file for fully model EM simulation

  

能够根据结构工程师提供的三维模型，提取出有效和准确的模型尺寸，并以此构筑出电路板中库的元件封装元件，提供给客户参考和调用，并能无误的输出ODB++文件供电磁仿真或者参考。

  

2. High frequency and high-speed edge card circuit board design for Test and measurement cable assembly, RF evaluation test board or system board design and layout, schematic created with Pads logic or designer, Decal creating and editing in library, critical Signal end or differential pair trace layout optimization

  

用于测试测量的射频电路，高速数字电路设计，包括射频电路评估板，无源/有缘电缆高速电路设计，系统板设计和布局，能熟练使用Mentor Pads 电路板设计软件，原理图设计完成，封装元件库，关键元件的封装的优化设计以满足信号完整性要求。

  

3. Discontinuity test board to support types of connector or cable assembly mechanical or environment test, choose proper test method embedded in the board that acquire accurate connector contact resistance data

  

产品设计需要设计相关的电路板来支持满足元器件测试，或者系统功能性测试，可靠性测试，耐压测试，环境测试。

  

4. Generate the correct format Gerber file or ODB++ file that fit for board house better understanding and manufacture, negotiated with board supplier or PCBA supplier and figure out the engineering question with them.

  

电路板设计的输出的制造文件必须有效，无误，适合加工，同时负责协调与PCB或者PCBA的供应商的技术沟通和工程问题解答。

  

5. Data correlation: RF Eval board plus connector or cable assembly measurement data vs simulation data

  

负责射频电路板，高速连接器，高速电缆的仿真数据与真实测试数据的相关性分析，总结归纳差异找到变异的主要原因。

    

6. As an electronic technology leader to communicate the relevant product testing requirements with the US electronic design team and make the product electrical performance test plan and product test standards according to the product's environment of application.

  

作为电子方面的技术沟通担当同美国电子设计团队沟通相关产品测试要求，根据产品的应该环境制定产品电气性能测试计划和制定产品测试标准。

  

7. Perform signal integrity test for engineering sample and get the fully report to be better support new product development and improvement, engineering sample failure analysis and troubleshooting.

  

工程样品的信号完整性测试，数据报告来反馈产品的性来决定产品设计或者制程是否需要进一步优化，指导制程工程师对电气性能不良的分析和问题解决。

    

8. According to the relevant test plans and test standards, complete the verification, report, and evaluation of the electrical performance stability and consistency of high-speed cables.

  

根据相关的测试计划和测试标准，完成高速线缆的电气性能稳定性和一致性的验证，报告，评估。

  

9. Collaborate test team and propose effective improvement plans for product testing methods and optimizes test method, to provide product process engineers with theoretical knowledge of electronic technologies such as RF to effectively control key process in product manufacturing processes.

  

协同测试组对产品测试方法提出有效的改善方案并进行优化，为产品工艺工程师提供RF等电子技术理论知识从而对产品生产工艺的关键环节进行有效的控制。

  

10. Align with US team, work together with them and start to do 3D module EM simulation/optimization on RF connector/circuit board/etc.

  

和美国团队一致设计要求并进行产品信号仿真工作关于射频连接器/电路板等的3维电磁仿真工作

  

11. Actively participate in COS and Continuous improvement activities

  

积极参与COS和持续改善活动.

  

经验及学历要求Experience/Education Required:

  

1. Bachelor’s degree in Electrical engineering or equivalent

  

电子工程或者相关专业本科毕业

  

2. At least 5 years’ design experience on high speed digital and RF field

  

至少在高速射频和数字信号传输产品设计工作至少5年以上

  

3. Be able to understand 3D step file and can read 2D mechanical drawing so that convert it to component footprint as PCB format and board outline

  

能读懂3D结构图，对2D工程图的准确理解并能准确应用到电路板设计上，使之匹配完好

  

4. Be proficient with PCB design Mentor Pads, Pads logic, Pads Router

  

能熟练运用PCB设计软件，Mentor 系列，有电路板设计项目的经验

  

5. Be familiar with circuit board building process is a plus.

  

熟练电路板加工制造的流程和工艺优先

  

6. Be familiar with different kinds of test equipment operation: LCR meter, Hi-Pot tester, Oscilloscopes, TDR, VNA/PNA, etc

  

熟练掌握各种电子测试设备的测试操作，包括各种示波器，时域分析仪，网络分析仪器，LCR机，频谱分析仪器等

  

7. With good signal integrity knowledge to understand transmission line, coax cable, Twinax cable, digital connector

  

对传输线，同轴电缆，差分电缆，数字连接器的结构和传输原理有相当的理解，并且对线缆的加工工艺有深刻的了解.

  

8. Preferred with good power integrity knowledge to support Oscilloscopes probe electrical design

  

9. 有电源完整性的设计经验者尤佳

  

10. With circuit board or connector 3D model EM simulation experience is preferred

  

有电磁仿真的设计经验尤佳

  

11. Fluent in both Mandarin and English

  

普通话和英文要求俱佳

  

Carlisle Interconnect Technologies (Dongguan) Co. Ltd---An American OWNED WOFE company
东莞卡莱互连电子科技有限公司（美国独资）

Carlisle Interconnect Technologies (Dongguan) Co, Ltd. (Hereinafter referred as “CIT DG”) is a diversified and world leading designers and manufacturers of high performance wire, cable, connectors and cable assemblies for the Test and Measurement, RF/Microwave, Medical, Automotive, Network Infrastructure, Commercial Avionics, military aerospace and Custom-made Products markets. Our products are targeted at applications in the aerospace, defense electronics, wireless infrastructure, optical telecommunications, and test and measurement industries. CIT DG is belonging to part of the Carlisle group of companies. Carlisle Companies was one of top 500 Enterprise in USA and the best performing stock on the New York Stock Exchange.
东莞卡莱互连电子科技有限公司,以下简称东莞卡莱，是一家为测试仪器、射频/微波、医疗、汽车、网络、民用飞机、军用航天等电子消费品市场提供高性能电线、电缆、连接器以及电子线束组件的高科技产品美资独资生产厂家。我们的产品应用在航空、国防电子、无线设备、光纤通讯和测试等领域。东莞卡莱是美国卡莱集团的一家分公司，卡莱集团是一家实力排行在美国500强内的美国上市公司，旗下的股票业绩在美国纽约有非常出色的表现。

CIT DG is located in the Xinhu Industrials Park, Dengwu village, Qiaotou Town, quite near to the Qiaotou Bus Station. It’s a modern facilities and convenient traffic factory. The company covers a land area of 10,556 square meters (i.e. 114, 000 square feet), owns a National standard Clean Room as well as Mold Tooling Room for Medical grade products, Injection and over molding tool design. The company implements advanced SAP system for internal management. Our current headcount are more than 400 and will be increasing to meet fast and continuous business growth.
东莞卡莱位于经济正处于高速发展阶段的东莞市桥头镇邓屋管理区新湖工业园（临近桥头汽车总站），地理位置优越，环境优美，交通便利。工厂拥有占地面积10,556平方米(114,000平方英尺)的生产基地,内设现代化无尘车间,生产符合医疗标准的医疗产品 并设有专用的模具房设计及生产注塑成型模具.使用先进的SAP系统进行数据管理.现时公司拥有职员工500多人,业务还在进一步不断快速拓展.

Benefits Policies
Salary -- CIT adjust the staffs’ salary once a year base on individual performance review & company business growth.
Insurance -- CIT provides all employees with basic medical, work-related injury and unemployment insurance based on statutory law.
Housing funds -- All CIT employees applies with housing funds.
Bonus -- Employees are applied to annual bonus and Service Award by every end of year.
薪酬福利
薪资：国内具竞争力的薪资，员工每年可根据公司的业绩状况进行年度调薪
保险：养老、工伤、医疗等国家法定的各类保险
住房公积金：为员工购买东莞市住房公积金
奖金：年终奖金、年资服务奖等

Accommodation
CIT provides free accommodation & convenient dormitory for living.
食宿安排
提拱免费食宿,公司拥有自己的食堂和职员工宿舍居住楼,为员工的生活提供了很大的便利

Travelling Allowance
返乡补贴

Leave Policies
Employee will apply to enjoy the leaves stated in national labor law includes Paid Annual Leave, marriage Leave, Maternity Leave and Paternity leave. .
假期制度
享有国家劳动法规定的工伤假、婚假、丧假、产假、护理假及带薪年休假等

Working Policies
8 hours per day and 5 days per week, overtime is paid accordingly to labor law.
工作制度
五天8小时工作制,超时工作部分按照国家劳动法规定支付加班工资

Training Policies
CIT provides diversified and beneficial trainings opportunity for every employee; outstanding candidates will be sent oversea training, learning and working.
培训制度
公司为员工提供多元化国内外培训，工作优秀者可选往国外培训、考察、工作。

Other 其他（包括年度旅游、年度体检、月度及节假日福利、月员工活动、季度生日会等福利）

CIT DG is standing in a fast and growing up development status. We welcome and looking forward you to joining us.
卡莱东莞的业务正处于高速发展的阶段,诚邀您的加盟,携手共创更辉煌的明天

Warm Notification,
CIT here clarify that our company phone number is begin with 0769-834****. Please note that we would never use mobile phone and other Personal Handphone System to contact candidate.
警请广大求职者注意:
最近，发现有不法分子利用我公司名义进行诈骗等不法行为，我公司已展开积极的调查。同时，本公司郑重申明：公司固定电话均“0769-8345****”，绝不会用小灵通或移动电话与应聘者联系.