东莞招聘

  

1.Maintain new part numbers, BOM, Routing to SAP system

  

维护新料号, 物料清单, 工艺路线到SAP系统

  

2.Drawing/design review

  

图纸或设计评审

  

3.Assure all engineering documents (Drawing,WI,Standard work,etc) are prepared and released without mistake

  

确保所有工程文件(图纸,作业指导书,标准化作业文件等)及时地准备和发行,确保资料的正确性.

  

4. Develop product process mapping with team

  

同团队开发产品过程流程图

  

5. Lead design/drawing review and Process Mapping with QE, PE, technician etc.

  

主导图纸/设计评审和制程流程图评估,同品质工程师,制造工程师,产品技术员等.

  

6. Works with Tooling&fixture engineer or PE to develop toolings and fixtures, participating in design reviews and qualification

  

同工治具工程师或PE开发新的工治具,并参与工治具设计评审和验收

  

7. Review test requirement and test plan(Reliability test) with test engineer or QE

  

同测试工程师或品质工程师确认测试要求及测试计划.

  

8.Develop PFMEA with team

  

同团队开发制程失效模式分析

  

9.Lead prototype build and process verification,follow up FA build and lead to resolve issues related testing, fit, reliability,etc.Summarizing and follow up open actions

  

主导首样和工艺验证,跟踪试样及主导解决试样过程中出现的测试,装配,可靠性等问题.总结试样/试产过程中现的问题并跟踪解决待改善的任务.

  

10.Release Part Approval Sheet,ensure all critical requirements are identified and inspected at incoming inspection

  

发行零件承认书,确保所有的关键检验项目能够被识别和检验在进料检查.

  

11.Create and manage ECO process, follow up ECO implementation, assesses the cost impact of customer changes to develop a cost estimate for sales

  

创建和管理产品变更，跟踪ECO实施,评估成本影响并给到销售.

  

12.Lead team to solving technical problem or process problem,etc.provides tenichcal analysis report. provides support to production in resolving engineering-related issues

  

带领团队解决技术或工艺问题等,提供技术分析报告.提供支持给到生产线有关解决工程相关的问题

  

13.Provides technical support to Customer or Sales,CS,buyer, Custom, etc.

  

提供技术支持给到客户,销售,客服,采购,报关等团队.

  

14.Works closely with CS and purchasing team to ensure RFQ’s are completed on time and obstacles are identified and resolved

  

保持与客服,采购团队密切合作来确认RFQ按时完成,识别和解决障碍.

    

15.Review product DFM before NPI build, and work with functional team to improve product

  

performance and manufacturability during product launching period

  

在产品启动阶段，检验新产品的可制造性，和相关职能部门改进产品性能和可制造性

  

16.Play a key role to introduce new products.Introduce, coordinate and conduct new/transfered

  

products into manufacturing.

  

作为一个关键的角色导入新产品，介绍，合作和导入新的和现在的产品到生产

  

17.Performs special assignments relative to Carlisle IT product engineering

  

执行有关产品工程的其它相关安排

  

  

经验及学历要求：

  Experience/Education Required:  

1.College Degree or above, major in Mechanical design, manufacturing and automation or electronics is preferred

  

大专及以上学历,机械设计制造及其自动化,电子专业优先

  

2.Minimum of 3 years of experience in RF cable assembly manufacturing engineering environment required

  

至少3年以上射频线束产品制造工程相关经验.

  

  

3. Be familiar with principle Microwave and RF and be able to fix the process problem by using knowledge.

  

熟悉微波射频工作原理，并能够利用原理解决产品加工工艺问题

  

  

4. Good skill at AutoCad softwares. Pro/e is a plus.

  

熟练操作Autocad.会使用PRO/E更佳

  

  

6. Experienced in solving engineering issue by use statistic tools such as DOE,CPK,SPC,8D and FMEA

  

is an essential experienced

  

熟练使用DOE,CPK,SPC,8D 和FMEA等工具解决工程的问题

  

  

7.understanding of components, processes, equipment, standards and terminology used in cable assembly production

  

了解线束行业零件,工艺,设备,标准,行业术语

  

  

8.Lean concepts understanding is required.

  

具备必需的精益知识

  

  

9.Careful, well-organized, responsible, team player with good communication and coordination skills.

  

工作细心,有条理,责任心强,具备团队精神和沟通协调能力.

  

  

10. Ability to read, write, speak and understand English.

     具备良好的英语听说读写能力。

Carlisle Interconnect Technologies (Dongguan) Co. Ltd---An American OWNED WOFE company
东莞卡莱互连电子科技有限公司（美国独资）

Carlisle Interconnect Technologies (Dongguan) Co, Ltd. (Hereinafter referred as “CIT DG”) is a diversified and world leading designers and manufacturers of high performance wire, cable, connectors and cable assemblies for the Test and Measurement, RF/Microwave, Medical, Automotive, Network Infrastructure, Commercial Avionics, military aerospace and Custom-made Products markets. Our products are targeted at applications in the aerospace, defense electronics, wireless infrastructure, optical telecommunications, and test and measurement industries. CIT DG is belonging to part of the Carlisle group of companies. Carlisle Companies was one of top 500 Enterprise in USA and the best performing stock on the New York Stock Exchange.
东莞卡莱互连电子科技有限公司,以下简称东莞卡莱，是一家为测试仪器、射频/微波、医疗、汽车、网络、民用飞机、军用航天等电子消费品市场提供高性能电线、电缆、连接器以及电子线束组件的高科技产品美资独资生产厂家。我们的产品应用在航空、国防电子、无线设备、光纤通讯和测试等领域。东莞卡莱是美国卡莱集团的一家分公司，卡莱集团是一家实力排行在美国500强内的美国上市公司，旗下的股票业绩在美国纽约有非常出色的表现。

CIT DG is located in the Xinhu Industrials Park, Dengwu village, Qiaotou Town, quite near to the Qiaotou Bus Station. It’s a modern facilities and convenient traffic factory. The company covers a land area of 10,556 square meters (i.e. 114, 000 square feet), owns a National standard Clean Room as well as Mold Tooling Room for Medical grade products, Injection and over molding tool design. The company implements advanced SAP system for internal management. Our current headcount are more than 400 and will be increasing to meet fast and continuous business growth.
东莞卡莱位于经济正处于高速发展阶段的东莞市桥头镇邓屋管理区新湖工业园（临近桥头汽车总站），地理位置优越，环境优美，交通便利。工厂拥有占地面积10,556平方米(114,000平方英尺)的生产基地,内设现代化无尘车间,生产符合医疗标准的医疗产品 并设有专用的模具房设计及生产注塑成型模具.使用先进的SAP系统进行数据管理.现时公司拥有职员工500多人,业务还在进一步不断快速拓展.

Benefits Policies
Salary -- CIT adjust the staffs’ salary once a year base on individual performance review & company business growth.
Insurance -- CIT provides all employees with basic medical, work-related injury and unemployment insurance based on statutory law.
Housing funds -- All CIT employees applies with housing funds.
Bonus -- Employees are applied to annual bonus and Service Award by every end of year.
薪酬福利
薪资：国内具竞争力的薪资，员工每年可根据公司的业绩状况进行年度调薪
保险：养老、工伤、医疗等国家法定的各类保险
住房公积金：为员工购买东莞市住房公积金
奖金：年终奖金、年资服务奖等

Accommodation
CIT provides free accommodation & convenient dormitory for living.
食宿安排
提拱免费食宿,公司拥有自己的食堂和职员工宿舍居住楼,为员工的生活提供了很大的便利

Travelling Allowance
返乡补贴

Leave Policies
Employee will apply to enjoy the leaves stated in national labor law includes Paid Annual Leave, marriage Leave, Maternity Leave and Paternity leave. .
假期制度
享有国家劳动法规定的工伤假、婚假、丧假、产假、护理假及带薪年休假等

Working Policies
8 hours per day and 5 days per week, overtime is paid accordingly to labor law.
工作制度
五天8小时工作制,超时工作部分按照国家劳动法规定支付加班工资

Training Policies
CIT provides diversified and beneficial trainings opportunity for every employee; outstanding candidates will be sent oversea training, learning and working.
培训制度
公司为员工提供多元化国内外培训，工作优秀者可选往国外培训、考察、工作。

Other 其他（包括年度旅游、年度体检、月度及节假日福利、月员工活动、季度生日会等福利）

CIT DG is standing in a fast and growing up development status. We welcome and looking forward you to joining us.
卡莱东莞的业务正处于高速发展的阶段,诚邀您的加盟,携手共创更辉煌的明天

Warm Notification,
CIT here clarify that our company phone number is begin with 0769-834****. Please note that we would never use mobile phone and other Personal Handphone System to contact candidate.
警请广大求职者注意:
最近，发现有不法分子利用我公司名义进行诈骗等不法行为，我公司已展开积极的调查。同时，本公司郑重申明：公司固定电话均“0769-8345****”，绝不会用小灵通或移动电话与应聘者联系.