常州招聘

职位描述：
Purpose

The Foundry Engineer will develop, monitor and coordinate production standards and methods for the effective utilization of resources and meeting the customer requirements. The Foundry Engineer will assist the Process Engineer in the development of systems and procedures for the reduction of product manufacturing cost, reduction of scrap, effective utilization of resources, product improvement, and the development and monitoring of efficiencies and standards to meet company goals.
铸造工程师应开发、监督和协调生产标准和生产工艺执行情况，确定资源的有效利用情况以及是否满足客户需求。铸造工程师应在系统的开发和产品降本、减废、资源的有效利用、产品改进等方面协助工艺工程师达成公司的目标。
Nature and Scope

Reduction of cost and improvement in efficiencies through development of systems, standards and procedures and monitoring of all manufacturing phases of products, will be an integral part of the Foundry Engineer function.
铸造工程师的重要职能之一就是通过改进系统、标准、工艺流程和监督所有制造流程达到降本增效。

The Foundry Engineer will administer the casting sample procedure and input that data into the computer system. The Foundry Engineer will utilize various systems such as the L-15; Engineering and/or Process Change Request form. The Foundry Engineer will monitor and make recommendations for changes, improvements and repairs to patterns. He/she will inspect and analyze casting defects and make recommendations for corrective action. The Foundry Engineer will monitor the manufacturing process and provide feedback and recommendations to all production centers.
铸造工程师执行铸件样品程序并将数据输入电脑系统。铸造工程师需要熟悉不同的系统比如L-15等；工程表格或者工艺更改申请表；监督和制定木模的更改、改进和修复的作业要求；检测分析铸件缺陷并制定纠正措施；监督制造工序并提供建议给所有生产部门。

Principal Accountabilities

1. Initiate sample procedures and follow samples through the manufacturing process, working with team leaders and production staff to produce the sample with the least cost and highest quality.
启动样品程序并全程跟踪制造工序，协同组长和生产部门以最低成本和最高质量生产出样品。
2. Coordinate, monitor, and ensure proper administrative controls are completed accurately by the appropriate person on all samples.
协同、监督保证完成所有样品的管理控制，确保由合适的人员完成操作。
3. Solidification modeling to ensure sound and defect free castings prior to sampling. Create 3D shapes in cad software package.
使用CAD软件创建3D模型，在制作样品前模拟凝固模型过程以保证铸件超声波检测没有缺陷。
4. Initiate and complete production standards. Review through audits.
启动并完成产品标准，通过审核。
5. Design and review pattern layouts, rigging systems, core design, etc. in order to produce castings that meet or exceed customer specifications.
设计审核模具平面布置图，调运系统，芯核设计等以保证生产铸件满足或者超越客户要求
6. Review casting NDT results with NDT personnel to ensure proper interpretation and resolution to results.
检查铸件无损检测结果，保证无损检测结果正确解释和判读。
7. Maintain knowledge and understanding of the developments and changes in foundry technology. Candidate will be responsible for trialing new product, process changes, etc.
不断学习掌握先进的铸造技术，负责跟踪新产品、工艺变化等。


Position Qualifications

The Foundry Engineer should have an 4 year Engineering degree in Metallurgy, Chemical, or Materials Science. A Technical School degree in an Engineering field or equivalent education and experience will be considered. The Foundry Engineer should be an effective communicator, both written and verbal. The position requires and individual that is able to affect change in a non-threatening manner. The incumbent must be willing to accept ideas and recommendations for any changes in operating procedures or processes. Candidate must be comfortable with working on computers. Experience with MAGMA solidification software is desirable.

Quality Objectives

ME-Global operates North American Foundries under the same Quality Policy Statement. It is the focus of the organization to ensure that Quality Objectives are established by Management and well in line with the Quality Policy Statement. It is the requirement of all ME-Global employees to strive for and meet our Quality Objectives.

Currently, the Organization drives for Four Main Quality Objectives.
They are:
I. Scrap/Non-Conforming Product Rate
II. On-Time Delivery Frequency
III. Safety/Severity
IV. Man-Hours per Ton/Productivity 举报 分享

美伊电钢是采矿、建筑与工业机械设备领域耐磨件整体解决方案的领先供应商。
依托近百年历史经验积累，美伊电钢始终专注于创新。以下里程碑事件见证美伊电钢的发展历程：
1917年在北美和南美的铸造厂内分别安装当时世界上最先进的电弧炉。
1959年获得埃斯科公司的技术许可证。
1976年在位于德卢斯的铸造厂内安装真空模塑系统。
2012年在中国常熟创建一家研磨介质制造厂和智利科利纳创建一家地面接合工具制造厂。
2012年，增资1800万美元扩建位于美国明尼苏达州东北部城市德卢斯和亚利桑那州坦佩的铸造厂。
现有产品：破碎机磨损件；研磨机衬板；研磨介质；地面结合工具；熔炉钢包和盛渣桶；大型专业铸件
美伊电钢（常州）机械有限公司为美伊电钢在常州的独资企业，成立于2012年7月，注册资本为2250万美元。
美伊电钢(常州)机械有限公司由南美克罗拉财团于2012 年独资设立，克罗拉财团是智利商业办极具影响力的集团公司，是南美***财团之一。在各种领域发展业务，诸如船运公司CSAV，港口和物流，矿山和钢铁制品，玻璃行业，包装行业，私人电视广播公司等。公司通过控股在中国、美国、巴西、印度及许多拉丁美洲国家均有投资的实业。2012年克罗拉财团在全球的业务达到65 亿美元。
美伊电钢(常州)机械有限公司坐落于常州滨江经济开发区，项目总投资4500万美元，注册资本2850万美元，位于新北区滨江工业园东港二路31号，用地面积100亩，新增建筑面积3.5万平方米。该项目铸件采用先进的工艺技术和设备，70%的铸型在自动造型线上完成，属于目前国际先进水平。项目建成后形成年产3 万吨矿山机械耐磨件的生产能力，达产后年销售额达4亿元。
项目钢结构主体已完成，办公楼主体建设已完工，内部装修完工，2014年4月设备安装完毕，5月开业生产。
为组建长期稳定的团队,公司将提供富有挑战性的工作,充足的职业发展机会,具有竞争力的薪酬福利。欢迎有识之士加入我们的团队!
应聘者请附中英文简历，谢绝来电来访。
邮编：213127
邮箱：violet.gu@me-elecmetal.cn
网址：http://www.me-elecmetal.com/en/index.php
地址：常州市新北区滨江工业园东港二路31号