Production Engineer
医科达(上海)软件研发中心
- 公司规模:50-150人
- 公司性质:外资(欧美)
- 公司行业:计算机软件
职位信息
- 发布日期:2013-09-05
- 工作地点:北京-昌平区
- 招聘人数:若干
- 工作经验:三年以上
- 学历要求:本科
- 职位类别:其他
职位描述
DESCRIPTION
Working for the Manufacturing Engineering department this role is an Industrial Engineer position with focus on Electronics and Electrical assembly and test. Industrial Engineers are required to design, set up and maintain the production process, tools and test equipment, this is for both in house production and to support third party supplier production as required.
The role requires working with suppliers, designers, other ELEKTA Factories, as required to:
- Support the production process and resolve technical issues with the product and/or test equipment and establish route cause and implement preventative actions via normal processes.
- Attend meeting and represent the industrial engineering department.
- Assist in production reliability and process mapping to continually improve and optimize production test efficiency.
RESPONSIBILITIES
Provide technical support to the production process and department to resolve manufacturing engineering related issues for released hardware, including authorization of Non Conformance Reports and amendments to production documents.
Design and Documentation of the Test Process including:
- Specification of Test Equipment and Special To Type Test (形式测试)equipment, in terms of Design, Manufacture and validation before use, and providing cost justification for them.
- Specification of test methods (compose Product Test Schedule based on Test Requirement Specification).
根据技术条件编写测试指导书
- Develop and maintain safe working practices, particularly with electrical hazards.
- Test Process improvement through Value Stream Mapping (价值流分析计划) and other tools.
- Design and Documentation of Assembly process and tools for Electronic or Electrometrical assemblies including Cable forms.
- Specification and Control of test software used in the production process via nominated responsible engineers.
- Participate in Engineering Change process, including updates to production process and Process Validation as a result of design change.
- Participate in the Product Creation process to develop manufacturing process, testability, tools, test equipment and carry out process validation.
- Support projects to transfer prodctuion from one facility to another (example: Elekta to Elekta, Elekta to Supplier and Supplier to Elekta).
- Other activities which the reporting manager assigns.
RELEVANT KNOWLEDGE, SKILLS AND COMPETENCIES
- Electronics related Degree from university plus minimum 2 years experience of working in an Electronics production environment.
- Working knowledge of Electrical/Electronics manufacturing process example: PCBs, Transformers, Control Systems, Backplanes, Cable forms etc...
- Working knowledge with the ability to implement and advise on Workmanship standards for both in house and third party production. Working knowledge of IPC standards is desirable but not essential.
- Ability to use CAD tools such as Solid Works, Solid Edge, Protel, and Mentor Graphics.
- Ability to Work both unsupervised under own initiative and within teams.
- Excellent organizational, team work and communication skills with a strong and positive influencing style.
- Strong English skills in listening, speaking, reading and writing. Able to communicate with all levels within a multi-disciplinary international company.
- Ability to organize and chair meetings.
- Willingness to learn and develop to maintain current electronics manufacturing knowledge.
- Familiarity with the performance and safety standards of radiotherapy equipment is desired but not essential.
- Work experience within wholly international or Joint venture Company working with technically complex, high cost capital equipment, is desired but not essential.
Working for the Manufacturing Engineering department this role is an Industrial Engineer position with focus on Electronics and Electrical assembly and test. Industrial Engineers are required to design, set up and maintain the production process, tools and test equipment, this is for both in house production and to support third party supplier production as required.
The role requires working with suppliers, designers, other ELEKTA Factories, as required to:
- Support the production process and resolve technical issues with the product and/or test equipment and establish route cause and implement preventative actions via normal processes.
- Attend meeting and represent the industrial engineering department.
- Assist in production reliability and process mapping to continually improve and optimize production test efficiency.
RESPONSIBILITIES
Provide technical support to the production process and department to resolve manufacturing engineering related issues for released hardware, including authorization of Non Conformance Reports and amendments to production documents.
Design and Documentation of the Test Process including:
- Specification of Test Equipment and Special To Type Test (形式测试)equipment, in terms of Design, Manufacture and validation before use, and providing cost justification for them.
- Specification of test methods (compose Product Test Schedule based on Test Requirement Specification).
根据技术条件编写测试指导书
- Develop and maintain safe working practices, particularly with electrical hazards.
- Test Process improvement through Value Stream Mapping (价值流分析计划) and other tools.
- Design and Documentation of Assembly process and tools for Electronic or Electrometrical assemblies including Cable forms.
- Specification and Control of test software used in the production process via nominated responsible engineers.
- Participate in Engineering Change process, including updates to production process and Process Validation as a result of design change.
- Participate in the Product Creation process to develop manufacturing process, testability, tools, test equipment and carry out process validation.
- Support projects to transfer prodctuion from one facility to another (example: Elekta to Elekta, Elekta to Supplier and Supplier to Elekta).
- Other activities which the reporting manager assigns.
RELEVANT KNOWLEDGE, SKILLS AND COMPETENCIES
- Electronics related Degree from university plus minimum 2 years experience of working in an Electronics production environment.
- Working knowledge of Electrical/Electronics manufacturing process example: PCBs, Transformers, Control Systems, Backplanes, Cable forms etc...
- Working knowledge with the ability to implement and advise on Workmanship standards for both in house and third party production. Working knowledge of IPC standards is desirable but not essential.
- Ability to use CAD tools such as Solid Works, Solid Edge, Protel, and Mentor Graphics.
- Ability to Work both unsupervised under own initiative and within teams.
- Excellent organizational, team work and communication skills with a strong and positive influencing style.
- Strong English skills in listening, speaking, reading and writing. Able to communicate with all levels within a multi-disciplinary international company.
- Ability to organize and chair meetings.
- Willingness to learn and develop to maintain current electronics manufacturing knowledge.
- Familiarity with the performance and safety standards of radiotherapy equipment is desired but not essential.
- Work experience within wholly international or Joint venture Company working with technically complex, high cost capital equipment, is desired but not essential.
公司介绍
Elekta is a human care company pioneering significant innovations and clinical solutions for treating cancer and brain disorders.
Elekta is a high technology medical device company working with the latest technology and tools within the development of software, electronics and hardware. Our manufacturing site has recently seen major investment in the latest tools and processes required to provide an efficient manufacturing process.
Elekta was founded in 1972 by the late Lars Leksell, Professor of Neurosurgery at the Karolinska Institute in Stockholm, Sweden. Today, Elekta solutions in oncology and neurosurgery are used in over 5,000 hospitals globally, and every day more than 100,000 patients receive diagnosis, treatment or follow-up with the help of a solution from the Elekta Group.
Elekta employs around 2,500 employees globally. The corporate headquarter is located in Stockholm, Sweden, and the company is listed on the Nordic Exchange under the ticker EKTAB.
Elekta has two legal entities, one JV, and one branch organization in China with functions of R&D, Engineering, Manufacturing, Purchasing, QA/RA, and other support functions.
Legal Entities: Elekta (Shanghai) Instruments Ltd, located in Shanghai and Beijing; Shanghai Elekta Oncology Systems Ltd, located in Shanghai
Joint Venture: Elekta BMEI (Beijing) Medical Equipment Co. Ltd, located in Beijing
Branch organization: CMS Worldwide Corp. Shanghai Rep. Office, located in Shanghai. CMS is the software development division responsible for software development around the world within the Elekta Groups
Elekta’s culture values diversity. By combining different traditions and backgrounds of all our employees we can create a positive and flexible organization.
We provide the opportunity and support to enable individuals to use their competencies to develop within a global environment.
Join us, by working together we can fight serious disease and enhance quality of life.
医科达 AB (公众)公司在华独资及合资企业
医科达 AB (公众)公司是跨国性医疗技术集团,总部设在瑞典斯德哥尔摩,并在斯德哥尔摩证交所上市。医科达 AB (公众) 公司是 医科达北研(北京)医疗器械有限公司、医科达上海软件研发中心(美国希迈仕国际公司上海代表处)、医科达(上海)医疗器械有限公司、以及上海医科达放疗设备有限公司的母公司。
医科达 AB (公众)公司在华独资及合资企业主要经营放疗和神经外科两大类产品,包括直线加速器及其相关附属产品,致力于建立本地化的研发、生产和技术支持,为客户提供更完善的服务。我们在此虚位以待,邀您共创中国放疗和神经外科的未来。
公司地址
北京:北京市昌平科技园区创新路21号,
上海:上海市浦东新区世纪大道1528号 陆家嘴基金大厦5F、3F 301, 上海市浦东新区金海路1000号B1
Elekta is a high technology medical device company working with the latest technology and tools within the development of software, electronics and hardware. Our manufacturing site has recently seen major investment in the latest tools and processes required to provide an efficient manufacturing process.
Elekta was founded in 1972 by the late Lars Leksell, Professor of Neurosurgery at the Karolinska Institute in Stockholm, Sweden. Today, Elekta solutions in oncology and neurosurgery are used in over 5,000 hospitals globally, and every day more than 100,000 patients receive diagnosis, treatment or follow-up with the help of a solution from the Elekta Group.
Elekta employs around 2,500 employees globally. The corporate headquarter is located in Stockholm, Sweden, and the company is listed on the Nordic Exchange under the ticker EKTAB.
Elekta has two legal entities, one JV, and one branch organization in China with functions of R&D, Engineering, Manufacturing, Purchasing, QA/RA, and other support functions.
Legal Entities: Elekta (Shanghai) Instruments Ltd, located in Shanghai and Beijing; Shanghai Elekta Oncology Systems Ltd, located in Shanghai
Joint Venture: Elekta BMEI (Beijing) Medical Equipment Co. Ltd, located in Beijing
Branch organization: CMS Worldwide Corp. Shanghai Rep. Office, located in Shanghai. CMS is the software development division responsible for software development around the world within the Elekta Groups
Elekta’s culture values diversity. By combining different traditions and backgrounds of all our employees we can create a positive and flexible organization.
We provide the opportunity and support to enable individuals to use their competencies to develop within a global environment.
Join us, by working together we can fight serious disease and enhance quality of life.
医科达 AB (公众)公司在华独资及合资企业
医科达 AB (公众)公司是跨国性医疗技术集团,总部设在瑞典斯德哥尔摩,并在斯德哥尔摩证交所上市。医科达 AB (公众) 公司是 医科达北研(北京)医疗器械有限公司、医科达上海软件研发中心(美国希迈仕国际公司上海代表处)、医科达(上海)医疗器械有限公司、以及上海医科达放疗设备有限公司的母公司。
医科达 AB (公众)公司在华独资及合资企业主要经营放疗和神经外科两大类产品,包括直线加速器及其相关附属产品,致力于建立本地化的研发、生产和技术支持,为客户提供更完善的服务。我们在此虚位以待,邀您共创中国放疗和神经外科的未来。
公司地址
北京:北京市昌平科技园区创新路21号,
上海:上海市浦东新区世纪大道1528号 陆家嘴基金大厦5F、3F 301, 上海市浦东新区金海路1000号B1
联系方式
- 公司网站:http://www.elekta.com
- 公司地址:上海市浦东新区世纪大道1528号 陆家嘴基金大厦5F、3F 301
- 邮政编码:200122