北京招聘

Key Responsibilities:

-Comply with IAC internal regulations and policies strictly .

在工作中严格执行埃驰公司的规章制度

-Identify and record equipment problems, prevent the accident is not in conformity with the provisions in the same place; Start and check the corrective action and participate in the review and by monitoring solutions to further process control.

鉴别并记录设备问题，防止不符合规定的事故重复发生；启动并检查纠正措施，参与审查并通过监控问题解决方案控制进一步处理工作.

-According to the request for machines, equipment, tools, equipment for electrical equipment maintenance and preventive maintenance work.

按照要求为机器、设备、工具、装备进行电气方面的设备保养和预防性的检修工作.

-Keep accurate electrical material and record update, ensure that all the equipment and tools have the complete record.

保存准确的电气资料并更新记录，确保所有的设备和工具都有完整的记录.

-To help repair factory equipment all relevant electrical fault, judge fault reason and make proper repair.

协助修理工厂设备所有有关电气方面的故障，判断故障原因并做出适当修理.

Analysis of various types of drawings and wiring diagrams, installation equipment lines and the demand of spare parts or replacement.

分析各种类型的图纸和配线图表、安装设备的线路以及备件的需求或更换.

-Analysis all the safety and preventive measures, and the right to cause damage to the production operation by circuit to minimize the impact

分析所有的安全防范措施,并正确的把由电路造成对生产操作的影响减到最低.

-Be familiar with engine, generator the power distribution, control instrument , circuit breakers, rectifier and other relevant electric device damaged parts and line down and the inspection, repair, adjust or change.

熟悉发动机、发电机、配电、控制仪表、电路断路器、整流器等有关电的装置上破损零件和线路的拆卸、检查、修理、调整或更换

-Carry out and track all shutdown program, collect CQIAC equipment safety guidelines of the material

执行并跟踪所有停工程序，收集CQIAC的设备安全指导方针的资料.

-Install new equipment or replace CQIAC equipment within the facility, responsible for the installation of pipes, device, switch, controller or regulator.

安装新设备或更换CQIAC内的设备时，负责安装管道、装置、开关、控制器或调节器

-Improves Equipment Engineering competitiveness and customer satisfaction by driving continuous improvement activities and inspiring innovations of ingenious products, services, solutions and processes.

通过推动持续改进活动和鼓励创新产品、服务、解决方案和流程，提高设备部门的竞争力和客户满意度

-Follows all Health, Safety and Environmental requirements that are defined on work instructions or communicated in trainings.

遵守工作中明确的或培训中传达的所有健康、安全和环境要求.

-Support other projects assigned by Supervisor.

支持主管分配的各项工作任务.

Requirements:

-High school graduate or above; At least 3 years experience in electrical or training; There must be through the county license test electrical certificates, high voltage electrical certificates and certain PLC experience; A certain amount of mechanical knowledge ，3 years of working experience related to facility equipment。

高中以上学历；最少3年电工经验或培训；必须有通过县区执照考试的电工证、高压电工证及一定PLC的经验；要有一定的机械知识，在生产设备领域有3年的工作经验.

-Have a solid electrical system of knowledge , and pneumatic, hydraulic, welding, electric and hand tools, electrical system and standard factory building equipment maintenance experience.

拥有扎实的电气系统的知识，并气动、液压、焊接、电动和手工工具，电气系统以及标准厂房设备维修经验.

-Ergonomic knowledge

人机工程知识

Location:工作地点：

重庆北部新区长福南路10号

Traffic Route交通路线：

长福支路（公交831终点） 到站后前进直行大丁字路口左拐 第一个十字路口

长福路站（轻轨3号线） 到站后机场方向 靠右前行 第一个十字路口右拐 直行第一个十字路口

万福花园（公交877站点） 到站后南山小区方向直行 第一个十字路口

小小岛/万福花园（公交621,622,684站点）

IAC是全球领先的汽车零部件及系统的供应商，产品涵盖内外饰、结构及功能部件，总部位于卢森堡，核心业务是车门及装饰系统；仪表板、中控台及驾驶座舱；汽车内部车顶的装饰系统还有内部及外部的配件，亚洲总部与亚洲工程中心位于上海， IAC拥有高度专业化的技术，为全球的汽车业开发制造高品质的产品。
IAC在全球19个国家拥有约70家机构，包括18个设计、技术和商业中心，在亚州拥有12个生产基地，雇员超过1000人。
IAC目前在上海设立中国总部，并在常熟、重庆、杭州、上海、北京、烟台、成都设有七家独资制造工厂及在武汉一家合资工厂。